Table of Contents
Advertisement
General:
If the geared motor is equipped with a hoisting accessory, be sure to use the hoisting accessory to lift and transfer a
load.
Operation conditions and ambient conditions:
If the geared motor malfunctions, the grease may leak from the motor. To protect the environment from the grease,
place an oil pan at the leak point.
Be sure to attach safety covers to the belts, chains, gears, etc.
Operation:
To operate the geared motor, observe the allowable loading torque range and the allowable starting frequency range.
During operation, if the motor generates an abnormal noise, vibrates extremely, or shows abnormal characteristics,
be sure to stop the motor, and inspect or overhaul the motor.
During operation, keep your body away from the geared motor. If you touch the geared motor during operation, you
may be injured or get burned.
If the geared motor is equipped with a one-touch manual brake release lever, be sure to lock the brake release lever in
the lever holder before starting operation.
Maintenance and modification:
Do not modify the geared motor.
Be sure to turn off the power before inspection or repairing the motor.
Disposal：
Treat the motor as general industrial waste when disposing of it.
1.Product Check ········································································································· 3
2.Operation Conditions Ambient Condition ··········································································· 3
3.Installation and Adjustment ·························································································· 3
4.Connection ············································································································· 4
5.Guidelines for replacing the old geared motor ····································································· 5
6.Wiring ·················································································································· 5
7.Motor Wiring and Output Shaft Rotational Direction Viewed Output Shaft End ······························· 6
8.Brake Wiring ··········································································································· 7
9.Brake(0.1～0.4kW) ···································································································· 9
10. Brake(0.75～2.2kW) ·································································································· 11
11.Dust＆Waterproof type ······························································································· 13
12.Operation ··············································································································· 15
13.Maintenance ············································································································ 15
14.Troubleshooting ······································································································· 16
15.Contact Us ·············································································································· 17
16.Labeling(product name)based on the Marking for the Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment:Geared Motor ··············································· 18
CAUTION
Contents
－ 2 －
Advertisement
Table of Contents
