Vehicle Speed Sensor; Speed Sensor Location; Speed Sensor Testing - Polaris RANGER XP 900 2013 Manual

Hide thumbs Also See for RANGER XP 900 2013:
Table of Contents

Advertisement

VEHICLE SPEED SENSOR

SPEED SENSOR LOCATION

The speed sensor (A) is located on the ride side of the
transmission, accessed through the right rear wheel well.

SPEED SENSOR TESTING

Special Tools Required:
Static Timing Light Harness (PN 2871745)
Hall Sensor Probe Harness (PN 2460761)
1. Disconnect the 3 wire harness from the speed
sensor
and
remove
transmission.
2. Connect the wires from the Static Timing Light
Harness to the sensor 3 pin connector using the Hall
Sensor Probe Harness (PN 2460761).
3. Pass a screwdriver back and forth in front of the
sensor tip.
4. Be sure connections are good and 9V battery is in
good condition. If the light flashes, the sensor is
good.
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
the
sensor
from
the
ELECTRICAL
10
10.7

Advertisement

Table of Contents
loading

Table of Contents