Cleaning The Cup-Rim Sensor; Cleaning The Milk Flask With Lid - Miele CVA 7840 Operating And Installation Instructions

 Clean the area around the main
dispenser with a damp cloth.
Reassembling the main dispenser
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Make sure that all parts are tightly
connected to one another.
 Reassemble the dispensing unit.
Press down firmly so that the spouts
become securely connected to the
holder.
 Insert the dispensing unit into the
coffee machine and connect the milk
pipework.
Cleaning and care
 Reinstall the stainless-steel cover.
 Close the appliance door.
Fit cover to main dispenser
the display.
 Confirm the message with OK.

Cleaning the cup-rim sensor

The cup-rim sensor is located under the
main dispenser.
Clean the cup-rim sensor at least once
a week and more often if heavily soiled.
 Press the two catches together (see
arrows).
The cup-rim sensor is released.
 The cup-rim sensor can be cleaned in
the dishwasher, or by hand using
warm water and a little liquid dish
soap.
 To reinstall the cup-rim sensor, press
it into the holder on the main
dispenser from below.

Cleaning the milk flask with lid

The milk flask should be taken apart
and cleaned every day after use.
will appear in
67