Table of Contents
Advertisement
Use the L-shaped bracket to mount the VPC800 on a wall.
Wall-Mounted
Prepare the hammer drill, rechargeable electric screwdriver, hammer,
and Phillips screwdriver by yourself.
Drill four holes in the wall for mounting the bracket, each with a
diameter of 8 mm (0.31 in.) and depth of 35–40 mm (1.38–1.57 in.). The
two holes in the upper part must be parallel to the horizontal plane to
ensure that the endpoint is horizontally installed. Then follow the steps
in the following figure to install the VPC800.
5
Advertisement
Table of Contents
