变成黄色,此时 A 点已确定。如果想重新选 A 点,短按“ ”键确定复读起点 A。 • 设置复读终点:设置复读起点 A 后,短按“ ”键确定复 读起点 B, 此时 OLED 屏中“A-B”的 B 也变成黄色。当复读 图标“A-B”都是黄色后,开始 AB 点间的反复播放;到达设 定的次数后,播放返回正常播放。如需要在 AB 复读过程中 频谱:播放界面将显示歌曲的频谱。 退出 AB 复读,可通过以下方式退出 AB 复读 : 歌词 : 如果机器里有相应的歌词, 播放界面就会显示歌曲的歌词。 短按“播放”键,将之前设置 AB 复读取消,并暂停播放。 歌词同步显示 短按“停止”键,将之前设置...
Page 35
Content Voice Playback Interface Specification: Audio Playback (1)Play mode (2)AB Replay 1 Welcome (3)Replay Times Safety (4)Replay interval Hearing safety (5)Variable speed (6)Scan speed (7)Details 3 Your Voice Tracer digital recorder Delete Files What’s in the box? Overview 8 Music Mode Music playback Interface illustration 4 Start To Use (1)EQ Mode...
Page 36
Delete Files System requirement Recording 10 Radio Mode 11 Setting Mode (1)Select Memory (2)Select Folder (3)Record Type (4)Voice-activated Recording (5)The Listen In function (6)Automatic file splitting (7)Backlight Time (8)Auto off (9)System time setting (10)Record timer (11)Language (12)Advanced 12 Frequently Asked Questions Cannot switch on the device Cannot record with the device The device cannot play recorded audio...
1 Welcome Welcome to the world of Philips! We are honored by your choice and purchase of Philips’ products. You can have Philips’ comprehensive technical supports from our website, e.g. user’s manuals, software downloading and warranty information etc. www.philips.com Product Features • One-touch voice recording: Just turn on the recording...
what’s around you. 2 Important • When in dangerous environment, please carefully use the earphones or stop using. • Do not use the earphones when driving, cycling, and Safety skateboarding to avoid traffic accident and violating laws and regulations. • To avoid a short circuit, do not expose the product to rain or water.
(1)When the power switch is in OFF position, the device is cut off from power and can’t switch on. (2)When the power switch is slid to “ON”, the device starts automatically and then displays “PHILIPS”, See the picture as follow: Then the device displays the stop playing interface. On this interface, press MENU button for 2 or 3 seconds to return to the main interface.
• Switch on: When in the power-off state, press the PLAY charge the device promptly. button until the startup logo “PHILIPS” is displayed. • Do not format memory and card on PC,otherwise negative impacts may happen to some fuctions of the device.
in the following picture. (2)Use the specified charger to charge the device. • To unlock buttons, please slide the “HOLD” switch down When using the above methods to recharge, the device will to OFF. be in the state of recharging. The battery indicator shows a battery icon turning from empty to full repeatedly, indicating that the device is recharging.
Page 45
Note When moving files into or out of the device, please do not disconnect the device from the computer. While the device is connected to a computer, it cannot be operated manually.
5 Voice Recording Illustration of Recording Interface: Before using the device, please read carefully the following instructions. (1)Slide the record switch to “REC” to start recording; the “Record/Play” indicator flickers red; please place the built- in microphone towards the source of sound. (2)Press “PLAY”...
Page 47
Note Note When the low battery icon appears, it means the battery is • Prior to recording, please preset the record type you nearly empty and the system will automatically shut down. need. If the device is recording, the system will automatically save • The recorded file can be stored in any of the A, B, C, D the recorded file then shut down.
Use an External Microphone to record When using an external microphone to record, please at first plug it into the Line in jack, and then record according to the procedures of recording with built-in microphone. After you plug in the external microphone, the built-in microphone is disabled.
6 Video Recording When you use this voice recorder to record video for the first time, please read the contents in this section! (1)The record video file is stored in the folder named VIDEO, which can maximally store 99 files. If the folder is fully loaded but you need to take another video record, please delete some unnecessary files before recording.
7 Voice Mode 3、Current Time 4、Total Time 5、TF Card Memory 6、Battery On the main interface you can select the voice mode with 7、A-B Repeat “ ” or “ ” buttons, and then shortly press the menu 8、Index button to enter. Please refer to the Voice Stop interface 9、Circulation Mode below: Audio Playback...
Note • If the earphone is plugged in, the speaker is disabled. After the audio file is selected, press the PLAY button shortly to play. When playing, press shortly the MENU button Sequence: play the file selected directory in order, all to pop up the following menu list: Play Mode, AB Replay, played out a times the current directory’s documents to...
(4)Replay interval Replay interval means the time interval between two replays. You can select “Replay interval” option in the play menu list, then press Menu button to enter into setting of Replay interval. Adjust the time of Replay interval (time unit: second) by “...
(7)Details Get detailed information of the playing file from this menu, such as bit rate, sampling rate and total time and so on. The reference interface is shown as below: Delete Files On the playing music interface, press the DELETE for about 2 seconds, the interface of the following picture will appear.
8 Music Mode Music playback Interface illustration From the main interface, you can choose music mode with “ ” or “ ” buttons, and then shortly press the MENU button to enter. Files list interface is as follows: 1、Music Folder Then, shortly press the Play button to enter the music 2、Current File Name playback interface.
Replay times, Replay interval, Variable Speed, Scan speed and From the menu list, select “Play Mode”, press MENU button Information. See the interface as follows: to enter. See the interface as follows: Sequence: play files sequentially from selected folder. After playing all the files in the current folder, the playing stops (1)EQ Mode automatically.
Spectrum:The display screen shows the spectrum of the press “ ” to make confirmation. playing music. • Set the finish mark:After setting mark A, shortly press Lyric:The display screen shows lyrics if there lyric file that “ ” to set the finish mark and the “B” in “A-B” on matches with music files are in the device.
Menu button to enter into the setting menu of Variable Speed. Adjust the play speed by“ ” or “ ” button. The reference interface is shown as below: (6)Replay interval Replay interval means the time interval between two Replays. You can select “Replay interval” option in the play menu list, (8)Scan speed then press Menu button to enter into setting of Replay interval.
Get detailed information of the playing file from this menu, such as bit rate, sampling rate and total time and so on. The reference interface is shown as below: Delete Files On the stopped playing interface, press the DELETE button for about 2 seconds, the interface of the following picture will appear.
9 Video Mode (1)Play mode When an option is selected, the corresponding area will turn On the main interface, we can select video mode by “ yellow. As the above picture shows, when you select “Play ”or“ ” button, and then press the Menu button to enter Mode”...
can select the scanning speed by “+” or “-” button and press 2 seconds, and it will display the following interface. The Menu button for confirmation. The reference interface is related reference picture showing deleting steps are as below: shown as below: If the device shows the interface on the left side, select “+”...
Page 61
10 Radio Mode From the main menu select Radio Mode, press MENU button to enter. See the below picture of Radio Mode: After Auto Search is selected, the system automatically searches radio channels. When a radio channel is found, the channel will be saved automatically and the radio channel number is saved in the channel list.
11 Setting Mode After the Micro TF is inserted into the device, device will display the other option: Card Memory. Users can select the storage location for recorded files. See the interface picture below: From the main menu select Setting mode, press MENU button to enter.
SHQ REC:MP3 format, high sound quality, bit rate: 192kbps. HQ REC:MP3 format, high sound quality, bit rate: 128kbps. SP REC:MP3 format, good sound quality, bit rate: 64kbps. SLP REC:MP3 format, ordinary sound quality, bit rate: 8kbps. Telephone Record (3)Record Type Connect the telephone cable provided with the device and external telephone cable to the telephone adapter.
audio cable (audio equipments such as radio, CD, VCD, DVD After activating the Listen In function, you can connect an etc.). Use the stereo audio cable provided with the device earphone to listen if there’s any sound input. See the Listen in to connect the audio equipment’s audio output with “Line function setting interface picture as follows: in”...
seconds and Constant. If there’s no operation on the device See the below picture of System time setting: for the set time, the backlight turns off automatically. If you select 0, the backlight is to be always. See the below picture of Backlight Time setting: On this interface, users can set the current time and the time display format.
On this interface, users can set the time when the device starts recording automatically. The method to perform the setting refers to “System Time Setting”. (10)Record timer Record source: users can select either voice source from the microphone or radio by pressing “+”or“-”. The default setting Record timer:preset the time at first, when system time takes the voice picks up by microphone as recording source.
(12)Advanced The Advanced menu list includes: Information, Clear Internal Memory, Clear Card Memory and Reset Default Setting. See the following interface picture: Note After the duration was set, please make sure the switch is in the position of ON when the device is power off, otherwise the device will not start recording when it reaches the preset time.
Answers to the frequently asked questions are listed here to solve simple problems that may to the device. If the problem cannot be solved, please contact the dealer or visit our official website: www.philips.com/support Cannot switch on the device: The battery is empty, please recharge promptly.