Command Link Multifunction Speedometers; Command Link Multifunction Fuel Management Meters - Yamaha F250B Owner's Manual

1
1. Set button
2. Mode button
1. Speedometer
2. Fuel meter
3. Multifunction display
EMU31622
Command link multifunction
speedometers
The speedometer unit shows the boat speed
and has functions of fuel meter and system
voltage display. The chosen display is select-
ed by using the "
buttons as described in this section. In addi-
tion, the speedometer can show the desired
unit of measurement such as km/h, mph, or
knots. If the speed sensor is installed, the unit
can also show the trip display. However, even
if the speed sensor is not installed, the trip dis-
play can be shown by connecting an optional
sensor to the unit. In addition, if optional sen-
sors are connected to the unit, water surface
2
ZMU05434
1 2
3
ZMU05435
" (set) and " " (mode)
Instruments and indicators
temperature display, depth display, and clock
will also be available. For the optional sen-
sors, consult your Yamaha dealer.
After the main switch is first turned on, all the
displays come on as a test. After a few sec-
onds, the gauge will change to normal opera-
tion.
For more information, see the operation man-
ual originally supplied with the meter.
1
1. Set button
2. Mode button
1
3
1. Speedometer
2. Fuel meter
3. Multifunction display
EMU31632
Command link multifunction
fuel management meters
The fuel management meter has the func-
tions of fuel flow meter, total consumption dis-
play, fuel economy display, and remaining
fuel display. The chosen display is selected
by using the "
2
ZMU05436
ZMU05437
" (set) and " " (mode)
2
47