Adjusting Print Density - Fujitsu 10 ppm User Manual

Printing Your First Document
1-20
4. If desired, change the font(s) in the document to one of the fonts
offered by your application.
5. Check the printer.
Look in the main window of the Print Manager to make sure the
printer is activated.
6. Print your document.
Start the program. The default paper size is fixed to A4 (for Europe)
or Letter (for the USA). However, you can print a document on a
different size of paper using the manual feed slot which you can
choose in the Printer Driver's main window.

Adjusting Print Density

If you feel that the printout is too light or too dark, adjust the print
density by turning the print density dial. It is located inside the top cover
above the control panel. Turning the dial clockwise darkens the print. A
counterclockwise adjustment lightens the print. After making the
adjustment, close the top cover, print your trial document again, and
check the results.
If you see a problem with the printed pages other than print density, see
Chapter 6 for possible causes and solutions.
If your document printed successfully, skip the next subsection. If
Something Goes Wrong.
Darken
Lighten
Print density dial
User's Manual