Advertisement
Away from other household appliances
Leave at least 2 cm of space to the left
and right of the freezer, at least 10 cm
of space above the freezer and at least
10 cm of space behind the freezer.
Use in hot spring areas
Corrosion control treatment may be required for the refrigerant
circuit (pipe) due to generation of corrosive gases.
Contact the retail store where you purchased the freezer.
WARNING
Do not obstruct the freezer vents or the space around
the freezer.
If refrigerant leaks, it may accumulate and catch fire
or explode.
WARNING
child safety
How to remove the energy label
.
Remove the energy label carefully. A glue residue
. .
may remain, particularly if the label has been in
place for a long period of time.
Apply either Eucalyptus or Tea Tree oil directly on any residue.
.
Do not allow the oil to run or drip onto plastic parts as it may
cause the plastic to degrade and potentially crack over time.
. .
Allow the oil to sit for approximately 1-2 minutes,
or until the glue residue has softened.
. .
Wipe off with a damp cloth.
If any residue remains, repeat the above process.
Rinse with clear water.
Dry thoroughly.
Do not damage the refrigerant circuit
(pipes) or drive screws into it.
Although R600a refrigerants are combustible, the refrigerant
circuit is hermetically sealed and normally leaks will not occur.
WARNING
Should the refrigerant circuit be damaged:
1. Do not use flames or electrical appliances nearby.
2. Open the windows to fully ventilate the room.
Then, contact the retail store where you purchased the freezer.
Follow the arrow sign to adjust up or down
the level of the appliance by turning the
supports located at the bottom.
WARNING
Advertisement
