Advertisement
2. MECHANISM DESCRIPTIONS
- Configuration
- Loading operation
1. When a disk is inserted, the centering arm L or R
rotates, and the loading motor starts when SW1 is
switched from ON to OFF.
2. For a 12-cm disk, when the disk is carried to the
position of a dashed line, SW3 is set to ON by the
centering arm L, and the microcomputer judges the
disk to be an 12-cm one.
3. For an 8-cm disk, the disk cannot approach to the
position of a dashed line, and clamp operation occurs
as is.
(Centering arms L and R are coupled. But even if only
one side is pressed the arms cannot rotate beyond a
fixed width as the coupling part is locked.)
- Disk centering mechanism
1. When a 12-cm disk is carried to the position shown
in the drawing, the centering guide relief arm rotates,
holds the centering guide. And the centering guide is
retreated from the disk trace.
Home SW
Core Unit
SW3
SW2
SW1
Clamp SW
Centering Arm L
Centering Guide
Relief Arm
CX-961
Carriage Motor
Pickup(P8)
Centering Arm R
Mechanical Unit Lock Arm
Centering Guide
15
Advertisement
