Asus ZenWiFi ET8 Quick Start Manual

Quick
Start Guide
ASUS ZenWiFi ET8
AXE6600 Tri Band WiFi Router
Model: ET8
Before Setup
Preparing to set up an AiMesh WiFi system
Find two ZenWiFi ET8, and power both on.
1
Use a network cable to connect your optical modem to the WAN port of either ZenWiFi ET8.
2
This ZenWiFi ET8 will be the AiMesh router, and the other ZenWiFi ET8 will be the AiMesh
node.
The LED turns solid blue to indicate that ZenWiFi ET8 is ready for setup.
3
ASUS Router App
Download free ASUS Router APP to set up
and manage your router(s).
AiMesh Setup Steps
01 Prepare
Place your AiMesh router and node within 3 meters of each
other during the setup process.
02 AiMesh node
Keep your AiMesh node powered on and standby for AiMesh
system settings.
03 Enabling Bluetooth
Enable Bluetooth on your phone.
Troubleshooting
If your AiMesh router cannot find any AiMesh node nearby or
synchronization fails, please check the following and try again.
a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is
within 3 meters.
Your AiMesh node is powered on.
b
CA17882_ZenWiFi_ET8_One-page_2PK_QSG.indb 1 CA17882_ZenWiFi_ET8_One-page_2PK_QSG.indb 1
Hardware Explanations
04 Launching ASUS Router APP
Launch ASUS Router APP, and then follow the on-screen
instructions to finish the AiMesh setup.
Plug the adapter into the DCIN port, and press the power button.
1
The power LED will light up when your hardware is ready.
2
Button and Port Explanations
DC-IN port Power button LAN ports 1-3 USB 3.0/2.0 port
2.5G / 1G
WAN port
Specifications:
DC Power adapter DC Output: +19V with max 1.75A current
Operating Temperature
0~40 o C Storage
Operating Humidity 50~90% Storage
AiMesh node
AiMesh Setup Steps
within
3 meters
AiMesh node
NOTE: When you're using a wireless backhaul to connect your router
and AiMesh node, the WAN port on your AiMesh node can be
used as a LAN port providing up to 2.5G transmission speed.
2.5G / 1G WAN port
Connect your optical modem to this
port with a network cable.
LAN ports 1-3
Connect your PC to a LAN port with
a network cable.
0~70 o C
20~90%
AiMesh router
AiMesh router
09/02/2021 15:21:32 09/02/2021 15:21:32