Preparation Tasks For Different Installation Roles; Tools & Instruments Preparation - Huawei BTS3802C Installation Manual

Installation Manual -Antenna & Feeder System Installation
BTS3802C & RRU
Obtain the relevant certificates after relevant training;
Be in good health, free of alcohol and have paid for personal safety insurance;
Use the safeties following their usage instructions;
Never wear loose clothes or slippery shoes when performing installation.

1.3 Preparation Tasks for Different Installation Roles

The project supervisor should contact customers who will be present on the site
before kickoff so as to prepare the instruments and tools needed. If the feeders
are to be routed through the cabling holes between buildings, it is necessary to
remind the customers of the keys to the rooms or roof corridor through which the
feeders run;
All persons on the site must wear safety helmets, and each installation team
should be provided with a first-aid kit;
The personnel under the tower are under the obligation to keep unrelated
persons, especially children away from the engineering site, and to take care
installation parts and instruments and prevent loss or damage from occurring;
The personnel on the tower must fasten safety belts, and get the tool kit and
some simple bandages such as the Woundplast handy.
Caution:
When multiple persons are to climb the tower, the person carrying the tool kit should climb up last
and down first lest a barely fallen tool should injure others.
The tool kit should be opened only when tools are needed and be closed immediately after getting
the tools.
1.4 Tools & Instruments Preparation
Table 1-1 illustrates tools and instruments exclusive for antenna & feeder system. The
common tools needed, such as percussion drill and screw drivers, have been listed in
the tool list for BTS3802C equipment devices installation.
Table 1-1 List of tools & instruments exclusively for antenna and feeder system installation
Suspension-
Measurin
No.
mounting
g tools
An angle An assembly
1
display pulley
Special
tools for
tools feeders
A feeder
nipper
Tools borrowed
Protective
from the local
tools
customer
Safety belts (for
Double ladder
personnel
required to
1-2
Chapter 1 Installation Preparations
Other
tools
Canvas
bag for
tools
Test tools
Cymomet
er