Advertisement
Indicator
Status
Solution
ˎ Check the cables
Blinking red
Indicates that a critical
error that will affect system
connected to the unit
operation has occurred.
and the signal status.
Example:
ˎ Check the installation
ˎ An error that hinders
status of the unit
network transmission has
(NXL-FR316) in which
been detected.
the board is installed
ˎ A temperature error on a
ˎ Restart the unit.
board has been detected.
If the status indicator
ˎ A reduction in fan
continues to blink red
performance has been
after checking these
items and restarting the
detected
unit, stop using the unit
ˎ An error that requires
and contact your Sony
a unit restart has been
representative.
detected.
Software licenses
You can extend the functionality of the unit by installing the following
software licenses. For details, consult your Sony service or sales
representative.
NXLL-SN50 SNMP Agent Software
Supports remote operation using the SNMP protocol.
Software version V2.00 or later can be installed on the unit.
NXLL-AM50 Audio Delay & Channel Mapping Software
Supports delay of an audio stream received from a network, and output
to SDI connectors or a network. For output, the received audio stream
channels can be mapped to 16 output audio channels.
Software version V2.30 or later can be installed on the unit.
NXLL-MC50 Multi Format Converter Software
Supports QFHD up-converted or HD down-converted video signal
output. Simultaneously, SDR/HDR conversion and color correction
functions are supported.
Software version V2.00 or later can be installed on the unit.
NXLL-JE50 JPEG XS Encoder Software
Supports encoding of SDI input signals or uncompressed video signals
received on a network to JPEG XS video signals for transmission on the
network.
Software version V3.10 or later can be installed on the unit.
NXLL-JD50 JPEG XS Decoder Software
Supports decoding of JPEG XS video signals received on a network to SDI
output signals or uncompressed video signals.
Software version V3.10 or later can be installed on the unit.
Specifications
General specifications (common to NXLK-IP50Y/NXLK-IP51Y)
Power supply
DC 12 V (supplied from NXL-FR316)
Power consumption
3.3 A, 40 W
Dimensions
Main board: 114.5 × 13.1 × 408.7 mm
(width / height / depth)
(4
5
/
×
17
/
× 16
1
/
in.)
8
32
8
Connector board: 131 × 17.7 × 95.4 mm
(5
/
×
/
× 3
/
in.)
1
23
7
4
32
8
Mass
Main board: Approx. 370 g (13 oz)
Connector board: Approx. 100 g (3.5 oz)
Temperature ranges
Operation guaranteed temperature:
5
°C
to 40
°C
(41
°
F to 104
°
F)
Performance guaranteed temperature:
10
°C
to 35
°C
(50
°
F to 95
°
F)
Storage temperature:
°C
°C
°
°
–20
to +60
(–4
F to +140
F)
SDI input/output specifications
Connectors
DIN 1.0/2.3 type: 75 Ω
(NXLK-IP50Y/NXLK-IP51Y)
BNC type: 75 Ω (NXLK-IP51Y only)
Number of lines
NXL K-IP50Y: 8 input/outputs (DIN 1.0/2.3 type)
NXL K-IP51Y: 1 input (DIN 1.0/2.3 type), 3 input/
outputs (DIN 1.0/2.3 type and BNC type)
Signal formats
SMPTE ST424, SMPTE ST292-1
(NXLK-IP50Y/NXLK-IP51Y)
SMPTE ST2082 (NXLK-IP51Y only)
Network (LAN) specifications (common to NXLK-IP50Y/NXLK-IP51Y)
Connectors
SFP28
Sony OTM-25GSR and OTM-25GLR
transceivers, and modules with power
consumption of 1.0 W or lower are supported.
Copper DAC (Direct Attach Cable) is not
supported.
Number of lines
2
Signal formats
25GBASE-** (using SFP28 transceiver module)
For details on supported SFP28 transceiver
modules (such as OTM-25GSR/OTM-25GLR),
contact your local Sony representative.
Supplied accessories (common to NXLK-IP50Y/NXLK-IP51Y)
Operating Instructions (1)
Design and specifications are subject to change without notice.
This product uses OSS (Open Source Software) components. For detailed
license information, refer to the installation manual.
Advertisement
