Receiving A Pcs Ready Link Call (1-To-1 Call); Receiving A Pcs Ready Link Call (Group Call); Redialing A Pcs Ready Link Call - Sanyo Sprint SCP-7200 User Manual

Receiving a PCS Ready Link Call (1-to-1 Call)

1. When you receive a PCS Ready Link call from a contact,
" Call," the contact's name and the PCS Ready Link number
appear on the display.
2. Press and hold
You can get the floor before hearing a voice if nobody has
the floor.
3. Speak after the beep (keep pressing down
speaking). After speaking, release the key to listen.
4. To disconnect the call, press

Receiving a PCS Ready Link Call (Group Call)

1. When you receive a PCS Ready Link call from one of the group
members, "Group Call," the name, and the PCS Ready Link
number appear on the display.
2. Press and hold
the floor).
3. Speak after the beep (keep pressing down
speaking). After speaking, release the key to listen.
4. To disconnect the call, press

Redialing a PCS Ready Link Call

You can redial to the last PCS Ready Link call that you dialed or
received (whichever was more recent).
To redial a PCS Ready Link call:
1. From the PCS Ready Link List, highlight Redial, then press and
hold
2. Speak after the beep (keep pressing down
speaking). After speaking, release the key to listen.
3. When you are finished, press
Note:
You can change the volume and the speaker setting while a PCS Ready
Link call is activated.
keys or / on the Navigation key except when you are pressing and holding
. This doesn't affect tone and beep volume.
On or Off by pressing
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics
to get the floor.
to get the floor (if nobody already has
to redial the last PCS Ready Link call and get the floor.
Volume:
Adjust the voice volume by using the Side Volume
.
while you are
.
while you are
.
while you are
.
Speaker:
Switch the speaker
29