11-7 HD and VD output (BE-IR30 only)
The BE-IR30 can be provided with horizontal and vertical drive outputs by changing chip parts.
Change the following chip parts to provide HD and VD outputs.
Factory setting
HD & VD output
0 :
Location of chip resistors(Main board side B)
BE-IR30 / 31
R233
R239
R240
0
Absent
0
Delete
0
Delete
Part code
RME1784
Type
ERJ3GEYJ0R00V
11. Function setting and changes
R241
R242
R248
Absent
0
Absent
0
Delete
0
Connector pin assignments after
change
Pin No.
Note: The accessory cable cannot
Note:
The accessory cable cannot
Note:
Note:
The accessory cable cannot
The accessory cable cannot
be used for signal outputs.
be used for signal outputs.
be used for signal outputs.
be used for signal outputs.
R249
R250
0
Absent
Delete
0
Signal
1
Video out
2
Video GND
3
GND
4
+9V
5
HD out
6
VD out
7
HD/VD GND
20