Hitachi HV-D30 Operation Manual page 55

2. After adjustment and operation with the RC-Z3, neglecting the Store operation
before cutting off the power loses the adjustment and setting item data.
output is the designated file data prior to adjustment and operation.
Be sure to conduct the Store operation when desiring to save the data after
adjustment and operation.
In this case, the data prior to Store are deleted.
0 R GAIN and
Red and blue video signal gain can be adjusted.
(lights) to allow adjusting.
Adjustment is coarse when the WHITE BALANCE mode select switch
Preset and fine when set to Memory.
R BLACK and
Red and blue video signal black level can be adjusted. Press the ENABLE
(lights) to allow adjusting.
Note: When CAM MODE AUTO, R & B black cannot be adjusted.
ENABLE button
ON : Button lights to indicate R & B gain and R & B black adjustments are effective.
OFF: Adjustments are ineffective when the ENABLE button is extinguished.
Note: When CAM MODE AUTO, the ENABLE button is ineffective.
TALLY/CALL button
TALLY/CALL button lights when pressed. However, function is ineffective in the
HV-D30 camera.
SHUTTER button
Shutter on/off; lights when on.
Note: When CAM MODE AUTO, the Shutter button is ineffective.
CONTRAST button
Contrast on/off; lights when on.
Note: Inoperative with gamma off (gamma set to off at SUB MENU 2 of menu mode).
ULTRA GAIN button
Ultra gain on/off. However, function is ineffective in the HV-D30 camera.
A WHT button
Direct mode: At White balance mode MEM, press A.WHT to conduct automatic white
balance (button lights). The resulting data are stored in application file
memory.
Menu mode: A.WHT button operation is inhibited.
42
B GAIN control
B BLACK control
Press the ENABLE
The
button
is set to
button