Control Of The Touch Function - HP L2105TM User Manual

Control of the Touch Function

Note: 1. Before using the touch function, make sure the USB cable is connected, the
2. When the touch function is active, make sure there is no foreign object in the
(Figure 5) Make sure there is no foreign object in the encircled areas.
The touch function may replace the mouse after you start the Windows operating system and
introduce appropriate gesture judgement. Gesture judgement and related Windows software
applications are listed below:
Finger Operation Windows 7
Drag Y
Click Y
Double-click Y
Single-touch
Y
digitizer
Multi-touch
Y
gestures
Use your finger or the provided stylus for touch applications.
Note:
• Keep the display away from any heat sources such as electric radiators, natural gas pipes or
direct sunlight.
Also keep the display away from excessive dust, mechanical vibration or shock.
• Retain the original carton & packaging materials. They will be convenient for you, if you need to
transport your display again.
• For best protection, pack the display in the original manner of package from the factory.
• To maintain a brand new appearance of the display, clean with soft cloth regularly. Please
remove stubborn stains with soft cleaner rather than strong cleaners such as diluting agent,
benzene or corrosive cleaner as they may damage the display. For the sake of safety, remove
the power plug prior to cleaning.
• The touch function may need about 7 seconds to resume if the USB cable is re-plugged or the
computer resumes from sleep mode (suspend mode).
10
touch applications from the CD-ROM are installed if you are running Windows
XP and the Window's operating system is started.
areas encircled in the figure below.
Windows
Vista
Y
Y
Y
Y
N
Windows XP
Windows XP
Tablet
Y Y
Y Y
Y Y
Y N
N N