Connecting The Cable Tv Or The Air Broadcast Antenna; Connecting Cable Or Satellite With A Set-Top Box - HP PL5060N User Manual

Connecting the cable TV or the
air broadcast antenna
Use standard 75-ohm coaxial cable to connect a
ground antenna or cable TV input source to the TV. Use
shielded coaxial cable to reduce radio frequency (RF)
interference.
Optional equipment, cable TV service, and all cables
are sold separately.
CAUTION: Unplug power for the TV and all
connected components before connecting
the antenna or cable.
1
Connect the input source coaxial cable to the
RF Input connector on the back of the TV.
RF INPUT
2
Connect power to the TV; see "Connecting power
to the TV" on page 16.
3
Turn on the TV; see "Turning the TV On and Off
(Standby)" on page 17.
Connecting cable or satellite
with a set-top box
Connecting your TV directly to the audio and video
output of your set-top box assures a more vivid picture
and enhances your viewing enjoyment.
Optional equipment and all cables are sold separately.
You can connect a digital TV set-top box (air or cable)
and other audiovisual equipment by using:
Component video and audio cables connected to
■
Component 1 or Component 2 connectors and
audio connectors on the TV.
S-video and audio cables connected to S-video 1
■
or S-video 2 connectors and audio connectors on
the TV.
Video (composite video) and audio cables
■
connected to Video 1 In or Video 2 In and audio
connectors on the TV.
HDMI cable connected to the HDMI connector on
■
the TV.
DVI video cable with a DVI-to-HDMI converter
■
cable and audio cables connected to the HDMI
connector and PC/DVI Audio In connector on
the TV.
CAUTION: Unplug power for the TV and all
connected components before connecting
the set-top box.
1
Connect the set-top box input source cable(s) to
the back of the TV using one of the connector sets:
Component video and audio cables
■
connected to Component 1 and Comp 1
Audio In connectors, or Component 2 and
Comp 2 Audio In connectors on the TV.
COMPONENT 1
Y PB/CB
COMPONENT 2
Y PB/CB
S-video and audio cables connected to
■
S-video 1 and Video 1 Audio In connectors, or
S-video 2 and Video 2 Audio In connectors on
the TV.
VIDEO 1 IN
S-VIDEO 1 S-VIDEO 2
VIDEO 2 IN
!
The S-video and Video In connectors share
the audio connectors in the set. Do not
connect video cables to both the S-video
and the Video In connectors in a set.
COMP 1
AUDIO IN
PR/CR R
L/MONO
COMP 2
AUDIO IN
PR/CR L/MONO R
L R
VIDEO 1 AUDIO IN
VIDEO 2 AUDIO IN
R
L/MONO
11
Setting Up