HP 820 User Manual page 87

Accessing a computer not on your network
If you want to dial in to a computer that is not on a net-
work (such as your home PC with Microsoft Windows 95
and Microsoft Plus! pack), you must set up the target PC to
receive your calls as follows.
•
The target desktop PC must be turned on.
•
The target desktop PC must have a modem installed and
configured and must be set to receive incoming calls.
(Refer to the instructions from the manufacturer of your
desktop PC modem.)
•
Dial-up Networking (Windows 95) or Remote Access
Service (Windows NT) must be set up and configured so
that your target PC can act as a server. (See your Win-
dows documentation for further instructions.)
•
Windows CE Services must be set up on the target PC
(for instructions, see the Installing Windows CE
Services section in this chapter). The Auto Connect
option should be set to At all times, also.
•
Windows CE Services must be running, and the Waiting
for mobile device to connect status message should
appear in the Mobile Devices window.
•
In the Windows CE Properties dialog box, Enable a
network connection must be selected.
•
Any folders or drives you want to access must be shared.
The only information you need to establish a remote network-
ing connection is:
•
Your Windows user name and password, if you are re-
quired to log on to your computer.
•
Telephone number of the modem.
To create a connection to a computer not on a network
(such as a home computer), you will need to create a new
connection using Remote Networking on your HP Jornada.
Chapter 4 Connecting to your desktop PC 83