Unpacking; Installing The Stands - Philips 74 Series User Manual

Unpacking

Cover a table top with a cloth or blanket to avoid damage to
the TV screen. Hold both sides of the TV set to place on the table.
1
Open the top flaps of the box.
2
Remove all accessories.
3
65" TV
4
Note(s)
Carefully lay the TV set, with the screen side down, on the front
●
cardboard as shown in the figure.
55" TV

Installing the stands

1
Fasten the stand to the TV with 4 screws.
× 2
Note(s)
While fastening the screws, hold the stand to prevent it from falling.
●
2
Both stands should now be securely fastened.
Note(s)
A wide open space is recommended for assembly.
●
A Phillips-head screwdriver is required to fasten the stands to the TV set.
●
When attaching the stand, ensure that all screws are tightly fastened. If
●
the stand is not properly attached, it could cause the unit to fall, resulting
in injuries as well as damage to the unit.
To remove the stand from this unit, unscrew the phillips-head screws by
●
reversing the procedure. Be careful not to drop the stand when you
remove it.
11 .
English
× 2
Continued on next page.