Advertisement
Electronic Control Panel
Ambient environment
The cooler should be placed horizontal and stable.
It should be removed from all packaging to reduce
vibration and noise. When unit is being moved, the
inclination angle should not be more than 45°.
Install the cooler in a good ventilation room to have
better cooling. A distance of 10cm between the wall
and cooler is required to ensure adequate ventilation.
Never place the cooler at a humid area or where it
may be easily splashed by water. Clean and dry any
water splashes and stains with soft cloths immediately
to prevent rust and unit should place at shaded area
to avoid raining.
Do not place the cooler under direct sunlight or at
a place where it will exposed to external heating
sources. Ambient temperature should not exceed
the climate type temperature on the nameplate.
(ST :16~38℃,T :16~43℃)
Do not place the cooler where the temperature is
too low or not according to the temperate climate.
Avoid placing cooler near any acute corner angle
to avoid contact to the glass door.
Advertisement
