Panasonic EW-DC12 Operating Instructions Manual page 16

4
W ipe o ff the w ater on the brush head and main
unit.
• Do not charge while it is wet.
(Doing so may cause soiling.)
If the identification ring comes off
As shown in the right figure, install the
identification ring with its convex part
(® ) aligned with the concave part (@)
of the brush head.
• Do not forcefully pull the
identification ring.
(Doing so may cause damage.)
• Using the toothbrush without the
identification ring has no effect on its
performance.
Cleaning the charger
1. Disconnect the power plug from the
household outlet.
Slide and remove the main unit
guide.
16
PB019965 - EW-DC12nnnnnn_(01GB)_02-19-21.indd 16
3. Wash the main unit guide with
running w ater before wiping
remaining w ater off.
• Except for the main unit guide, all
other parts cannot be washed with
water.
4. W ipe off the dirt on the bottom of
the charger with soft cloth.
► Attaching the main unit guide.
© Align the main unit guide with the specified line of
the charging stand.
@ Slide the main unit guide until it clicks into place.
carne
M H c r p y ^ M M H a P a n a t e x . c o m . u a
±
©
2021/2/19 15:30:49