GE GPF325 Series Installation Instructions Manual page 3

3 INSTALL DOOR PANEL TRIM
AND CUSTOM PANEL
C
• Slide custom door panel under the
"Z" trim and bottom trim.
E
• Use masking tape to hold trim tightly
against the custom panel.
(continued)
D
• The notch on the side trim pieces goes
towards the front. Slide side trim up and
under the escutcheon and over the edge
of the custom panel.
F
Tape Trim
to Custom
Panel on
Each Side
• Center punch and drill holes through the
holes in the side trim and into the dishwasher
door.
• Secure the trim to the door with color
matched screws provided. Remove tape.
3
Drill Holes
and Install
Screws