Adding Rinse Aid To The Dispenser - Toshiba DW-08T1CIS-UA Instruction Manual

Adding rinse aid to the dispenser

1
Remove the rinse aid reservoir cap
by rotating it counterclockwise.
3 Close the rinse aid reservoir cap by
rotating it clockwise.
Adjusting the rinse aid reservoir
Adjust lever(Rinse)
Attention
Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming
during the next wash.
Turn the rinse aid indicator dial to a number between 1 and 6.
The higher the number, the more rinse aid the dishwasher uses.
If the dishes are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-free.
Reduce it if there are sticky whitish stains on your dishes or a
bluish film on glassware or knife blades.
2
Carefully pour in the rinse-aid into
its dispenser, whilst avoiding it to
overflow.
19