Table of Contents
Advertisement
–
Activate
This setting is only visible if
Miele@home is deactivated. The WiFi
function is reactivated.
–
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the WiFi
function is switched off.
–
Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the WiFi
reception quality, network name and
IP address.
–
Set up again
This setting is only visible if a WiFi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
–
Reset
This setting is only visible if a WiFi
network has already been set up. The
WiFi function is deactivated and the
WiFi connection will be reset to the
factory default. You must set up a
new WiFi connection to be able to
use Miele@home.
The network settings should be reset
whenever a steam oven is being
disposed of or sold, or if a used
steam oven is being put into
operation. This is the only way to
ensure that all personal data has
been removed and the previous
owner will no longer be able to
access the steam oven.
–
Set up
This setting is only visible if no WiFi
connection has been set up yet. You
must set up a new WiFi connection to
be able to use Miele@home.
Remote control
If you have installed the Miele@mobile
app on your mobile device, have
access to the Miele@home system and
have activated the remote control
function (
), you can use the
On
MobileStart function to retrieve
information on steam oven cooking
programmes that are in progress or to
end a programme in progress.
Activating MobileStart
Select the sensor control to
activate MobileStart.
The sensor control lights up. You
can operate your steam oven remotely
with the Miele@mobile app.
Directly operating the steam oven via
the touch display takes priority over
operating it via the remote control
function on the app.
You can use MobileStart as long as
the sensor control is lit up.
Settings
55
Advertisement
Table of Contents
