Page 2
Important Information No patent liability is assumed by TOSHIBA Corporation with respect to use of information, illustrations, circuits, equipment or examples of application in this publication. TOSHIBA Corporation reserves the right to make changes and improvements to this publication and/or related products at any time without notice.
Page 3
Safety Precautions This manual contains important information for the operator to operate this product safely and correctly and avoid bodily injury and property damage. Grasp the meanings of the following marks and their descriptions before reading this manual. Hazard Classifications Indicates a potentially hazardous situation which, if not avoided, could WARNING result in serious injury or death.
Page 4
1. Checking the Warning Labels on the Main Unit Make sure warning markings are attached on the main unit. If any of them are missing or the wording is illegible, contact Toshiba's Service Department. 2. Precaution on Installation WARNING Mandatory Be sure to ground the equipment.
Page 5
Forbidden Do not cover the hole of the equipment, and the ventilator/air inlet of the system. Otherwise, overheating, etc. can cause fire or malfunction. 3. Safety Precautions on Maintenance and inspection WARNING Mandatory Mandatory Turn off power removing any modules after Turn off power removing or connecting any installing.
Page 6
Otherwise, it can cause malfunction, machine the equipment. damage or fire due to overheat. Contact Toshiba for repairing. Operation under such situation can cause fire or electrical shock. Remote Engineering Package...
Page 7
CAUTION Forbidden Forbidden Do not touch any components, terminals, Do not forcibly bend or pull or distort the connectors, or printed circuit boards in the power cord and other cables. Otherwise, they module. can be cut off or cause overheat. Otherwise, it can cause the IC or LSI or the like to be broken by static electricity, resulting in failure or malfunction.
Page 8
Toshiba is not liable for any incidental loss caused by the use or non-use of this product, such as loss of business profits, suspension of business, or loss or change of data on memory.
Page 9
PC on user’s private network with the remote PC on Internet over the user’s firewall, using only HTTP and HTTPS protocols. This product is independent of V-Tool, that is the engineering tool of V series. So it can be used to not only remote control V-Tool, but also any other applications, for instance, SCADA, maintenance tools on user’s PC.
Page 10
Preface The contents of this document are shown as follows: Chapter 1. Requirements for Remote Engineering 1.1 Requirements for Network Configuration 1.2 Requirements for Hardware and Software Chapter 2. How to Install/uninstall Remote Engineering Package 2.1 How to install 2.2 Setting for license authorization 2.3 How to uninstall Chapter 3.
1.1 Requirements for Network Configuration The network configuration that realizes remote engineering is shown in the following figure. The remote controlled side Target of operation (V-Tool) License Authorization In TOSHIBA (Private IP) Windows XP Pro MAN-PC License Authorization Server Remote Desktop...
Page 14
HTTP and HTTPS. REM-PC needs the software Remote Engineering Package presents. License Authorization: TOSHIBA has the license authorization server in The Internet. To get license authorization, both MAN-PC and REM-PC connects with the server using HHTP(SSL) protocol. Remote Engineering Package...
Remote control software Windows Remote Desktop (already installed in Windows XP Professional and Windows server 2003.) Remote- controlled application V-Tool that is engineering tool of V series, or any other applications in MAN-PC. Network environment Be able to connect with the Internet.
Chapter 2 How to Install/uninstall Remote Engineering Package 2.1 How to install Double-click the <Remote Engineering Package.exe> file in the CD-ROM of this package. Click <Next> button several times, and go until the end. 6F8C1130...
Chapter 2 How to Install/uninstall Remote Engineering Package 2.2 Setting for license authorization • Registration of license authorization server address. Double-click the < Toshiba License Server.reg > file in the CD-ROM Remote Engineering Package...
2.3 How to uninstall 2.3 How to uninstall Click the <Start> menu and <All Programs (*)>< Remote Engineering Package >< Uninstall Remote Engineering Package v1.8.> (*) Windows 2000 has “Programs”. 6F8C1130...
Page 20
Chapter 2 How to Install/uninstall Remote Engineering Package Remote Engineering Package...
Chapter3 How to use Remote Engineering Package 3.2 Step1: Preparation Setting of Windows Remote Desktop: Click <Start>menu and right click<My computer>, select <Properties> menu to open the “property of system” window. Click the <Remote> tab, and mark <Allow users to connect remotely to this computer> check box.
3.3 Step2:Staring REM-PC 3.3 Step2: Starting REM-PC Double click the shortcut icon on the desktop of REM-PC to open the following window. When you start REM-PC at the first time or want to change the connection settings, do the following operations. License activation: Click the <Activate REM-PC>...
Page 24
Chapter3 How to use Remote Engineering Package Connection Settings: Click the <Configuration> tab to open the <Connection Settings> view. The Connection Settings has the following three types. Select one of the items as you want. (1) I want to use Internet Explorer’s Proxy-Settings This option copies the proxy server settings, which Internet Explorer uses to browse the web.
3.4 Step3:Starting Server of REM-PC 3.4 Step3: Starting Server of REM-PC Click the <Start Server> button to perm the server of REM-PC. Note: In case REM-PC has two or more NIC (Network Interface Card), select one of the IP addresses to connect with the Internet. 6F8C1130...
Chapter3 How to use Remote Engineering Package 3.5 Step4: Starting MAN-PC Double click the shortcut icon of the desktop to open the following window. When you start REM-PC at the first time or want to change the connection settings, do the following operations.
Page 27
3.5 Step4:Starting MAN-PC License activation: Click the <Activate MAN-PC> button and enter the 32 characters of license-key. The key is printed on the enveloped sheet of the package. Connection Settings: Click the <Connection Settings> button. The Connection Settings has the following three types. Select one of the items as you want. (1) I want to use Internet Explorer’s Proxy-Settings This option copies the proxy server settings, which Internet Explorer uses to browse the web.
Chapter3 How to use Remote Engineering Package 3.6 Step5: Connecting MAN-PC to REM-PC Click the <Connect> button of MAN-PC to open the <Configure IP> dialog. Enter the global IP address of REM-PC which is already written down at the Step1. Remote Engineering Package...
3.7 Step6:Starting Windows Remote Desktop 3.7 Step6: Starting Windows Remote Desktop Click the <Manage Bound Ports> button on REM-PC to open the following window. Select Application: Windows Remote Desktop is already selected in the <Application> items. In case you want to change the binding application, select the other. Bind Port: Select the MAN-PC (Display Name @ a random number) in the <Select Client from List>...
Chapter3 How to use Remote Engineering Package 3.8 Step7: Operating Windows Remote Desktop Option Settings: In the starting dialog of Windows Remote Desktop, if you want to coping files between the two PCs, click the <Option> button and the <Local Resource> tab and mark the <Disk Drive>.
Page 31
3.8 Step7:Operating Windows Remote Desktop The desktop of REM-PC The remote desktop of MAN-PC The MAN-PC is screen locked when logged on by Remote Desktop. During the screen locked, If the user logs on to the MAN-PC on the local side, the Remote Desktop on REM-PC is made closed.
Chapter3 How to use Remote Engineering Package 3.9 Step8: Closing Windows Remote Desktop In REM-PC, click the <X> button on the upper right of the view of the Remote Desktop. Remote Engineering Package...
3.10 Step9:Closing MAN-PC 3.10 Step9: Closing MAN-PC On the local side of MAN-PC, log on to MAN-PC to terminate Remote Desktop. Click the <Quit> button of the <MAN-PC> window. 6F8C1130...
Chapter3 How to use Remote Engineering Package 3.11 Step10: Closing REM-PC. On the local side of REM-PC, click the <Quit> button of the <REM-PC> window. Remote Engineering Package...
3.12 Other operations 3.12 Other operations Item Meaning <X> button on the upper Minimize. (Hide when Minimized) Notice: Not quit. right of the window. Click on the <M> or <R> icon of the Indicator of Taskbar to reopen. <M> is for MAN-PC, <R> for REM-PC. <Minimize>...
Page 36
Chapter3 How to use Remote Engineering Package Remote Engineering Package...
Page 37
Chapter 4 Messages of Remote Engineering Package This chapter explains the error messages displayed in the <Notifications> box in MAN-PC or REM-PC. 6F8C1130...
Chapter4 Messages of Remote Engineering Package 4.1 Error messages of MAN-PC Error message Cause Solution 1 MAN-PC requires Activation. License activation of MAN-PC is not Enter the 32 characters of license-key, and completed. Activate MAN-PC. See “License Activation:” of “3.5 Step4”. 2 Activation Request failed due to MAN-PC was not able to communicate to Confirm the following.
4.2 Error messages of REM-PC 4.2 Error messages of REM-PC Error message Cause Solution 1 REM-PC requires Activation. License activation of REM-PC is not Enter the 32 characters of license-key, completed. and Activate REM-PC. See “License Activation:” of “3.3 Step2”. 2 MAN-PC (%s) has disconnected.
Chapter4 Messages of Remote Engineering Package 4.3 Messages of Windows Remote Desktop. Windows Remote Desktop sometimes says some error messages when the network bandwidth is below one hundred kbps or the traffic is jammed. Furthermore, see the <Help><Trouble shooting>menu of Remote Desktop when the other error messages are displayed.
Page 41
Chapter 5 Trouble Shooting of Remote Engineering Package Disconnected communication during remote control: Cause: When the disconnecting or reconnecting of communication occur, the Windows Remote Desktop may perform as follows. Case 1: The view of Remote Desktop is updated but not operated. Case 2: The Remote Desktop is not updated nor not operated.
Page 42
Chapter 5 Trouble Shooting of Remote Engineering Package REM-PC cannot start the Windows Remote Desktop: Cause: The communication with MAN-PC may have disconnected. Solution: If MAN-PC is disconnected, restart MAN-PC to connect with REM-PC. Windows Remote Desktop says error message first time to start. Cause: MAN-PC does not allow the connection of Windows Remote Desktop.