Alignment Settings - Panasonic TX-G10/C Service Manual

ALIGNMENT SETTINGS

1. To place the TV into Service Mode, set the Sharpness to minimum position, place set in program position 60, press
the down button (v) on the customer controls at the front of the TV and at the same time press the Off Timer button
on the remote control.
2. Press v / v buttons to step up / down through the functions.
+ / -
3. Press ( ) buttons to alter the function values.
4. Press the TV/AV button after each adjustment has been made to store the required values.
5. To exit the Service Mode, press the "N" button.
(The figures below are nominal and used for representative purposes only.)
Alignment Function
Vert. Amplitude
Horizontal Centre
Red Cutoff
Green Cutoff
Blue Cutoff
Red Drive
Blue Drive
Sub-Contrast
Sub-Colour
Sub-Brightness
All manuals and user guides at all-guides.com
VAmp
56
HCtr
09
RCut
159
GCut
64
BCut
182
RDrv
38
BDrv
29
SCon
22
SCol
48
SBri
49
7
Settings / Special features
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.