JVC TD-EX90 Instructions Manual

Jvc cassette deck instructions

Advertisement

CASSETTE DECK
TD-EX90
TD-EX90
CASSETTE DECK
REC PAUSE
CD REC
AUTO REVERSE
STANDBY
DOLBY
REVERSE
B
DOLBY
C
REC
NR
MODE
POWER
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0091-001A
[J]

Advertisement

Table of Contents
loading

Summary of Contents for JVC TD-EX90

  • Page 1 CASSETTE DECK TD-EX90 TD-EX90 CASSETTE DECK REC PAUSE CD REC AUTO REVERSE STANDBY DOLBY REVERSE DOLBY MODE POWER INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.
  • Page 2 Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"...
  • Page 3: Welcome

    Welcome ! We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer.
  • Page 4: Table Of Contents

    MD synchronized recording ... 15 COMPU LINK ... 16 Linked Operation of the Other Optional components(Compu Link) ... 16 Additional Information ... 18 Types of cassette tape ... 18 Handling cassette tapes ... 19 Maintenance ... 19 Troubleshooting ... 20 Specifications ... 21 TD-EX90...
  • Page 5: Parts Index

    Parts Index Front Panel TD-EX90 STANDBY POWER POWER switch Press to switch the power between ON and STANDBY. STANDBY indicator The indicator is off while the power is ON and lights up when the power is in STANDBY mode. Indicator panel DOLBY NR button Press to activate Dolby Noise Reduction.
  • Page 6: Display

    (™ ), one side of the tape will be recorded and stopped. Off: • Playback or recording stops at the end of the tape (one side). TD-EX90 Tape operation indicators These indicators show the tape transport direction and operation status.
  • Page 7: Rear Panel

    Connect each jack with the provided COMPU LINK-3 (SYNCHRO) jack of another component. Either jack can be used for the connection. RIGHT LEFT COMPU LINK-3 (SYNCHRO) AC POWER CORD receptacle Connect the provided AC power cord. AC POWER CORD TD-EX90...
  • Page 8: Setting Up The System

    Near appliances that receive electronic wave broadcasts, such as a television. Special attention To protect from damage or malfunction,do not place this cassette deck on an amplifier or equivalent to generate heat. TD-EX90 TD-EX90 CASSETTE DECK Cassette deck REC PAUSE...
  • Page 9: Connections

    IN (REC) jacks to its OUT (REC) jacks. LEFT COMPU LINK-3 (SYNCHRO) Compu Link cable Connect to the COMPU LINK-3 (SYNCHRO) jack of another component equipped with Compu Link remote control system. AC POWER CORD TD-EX90...
  • Page 10: Playback

    Caution Playback may be interfered with noise if there is a TV set nearby. In this case, turn off the TV or increase the distance between the TV and this unit. TD-EX90 Press 0. The tape tray comes out open.
  • Page 11 Select B or C according to the Dolby NR type used when the tape was recorded. The indicator of the selected type should light up. The Dolby NR allows to reduce hiss noise in playback. DOLBY C NR (Indicator lit) TD-EX90...
  • Page 12: Recording

    The type of tape is identified automatically by the cassette deck. REC PAUSE CD REC TD-EX90 Load the tape for use in recording, with the side A facing up. Press 0 to open the tape tray, place a tape on it and press 0 to close it.
  • Page 13 Off (Canceled) • A tape recorded using Dolby NR should be played back using the Dolby NR of the same type as that used in recording. The audio quality will be affected if a different type is used in playback. TD-EX90...
  • Page 14: Cd Synchronized Recording

    Be sure to make the Compu Link connection among the EX series components. REC PAUSE CD REC TD-EX90 Load the tape for use in recording. Press 0 to open the tape tray, place a tape on it and press 0 to close it.
  • Page 15: Md Synchronized Recording

    Synchronized recording starts. To stop recording: Press &/CANCEL of the MD recorder to stop recording. The cassette deck will stop after leaving a non-recorded blank of 4 seconds. If you want to stop recording immediately, press 7 of the cassette deck. TD-EX90...
  • Page 16: Compu Link

    COMPU LINK Linked Operation of the Other Optional components (Compu Link) The EX series components can be controlled under linked operation provided by the JVC’s Compu Link remote control system. Compu Link The world of single components, in which you purchase a cassette deck, CD player, amplifier and other components separately and enjoy your own composition, is an effective means for pursuit of high-quality reproduction.
  • Page 17 The timer function built into the amplifier/tuner can be used to start recording or playback of other components at the reserved time of the day or switch the power to the STANDBY mode in the reserved time period. * Refer to the instruction manual of the amplifier/tuner. TD-EX90...
  • Page 18: Additional Information

    Certain early period metal and high position (CrO The cassette deck cannot obtain the correct characteristics for these tapes. • Ferrochromite (FeCr) TYPE III tapes cannot be used with this cassette deck. TD-EX90 Normal (No detection slots) ) tape High position...
  • Page 19: Handling Cassette Tapes

    When doing so, be sure to turn the volume of the amplifier all the way down, or you may harm the amplifier or speakers. For details, read the instructions that come with the tape head demagnetizer. TD-EX90...
  • Page 20: Troubleshooting

    Bad sound quality or absence of high frequency sounds Cassette holder will not open (or close) Humming noise Operation is abnormal. TD-EX90 POSSIBLE CAUSE • The tabs on the cassette have been removed. • The deck is set to pause.
  • Page 21: Specifications

    Approx. 120 sec. with C-60 cassette Power requirements AC120 Power Consumption 7watts (OPERETE ON) , 3watts (OPERETE STANDBY) Dimensions (7-7/8 3-3/16 Mass 2.4 kg (5,3 lbs) Audio pin cord Compu Link cable AC power cord 60Hz 80 305 mm (W H D) 12-1/16 inches) TD-EX90...
  • Page 22 Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
  • Page 23 WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers.
  • Page 24 VICTOR COMPANY OF JAPAN, LIMITED 0598TTMWSTOZK...

This manual is also suitable for:

Td-ex90j

Table of Contents