Using The Tuner; Tuning In A Station - JVC MX-KC45 Instructions Manual

Using the Tuner

Numeric
keys
1
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
❏ Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See pages 4 and 5.)
One Touch Radio
Just press the FM/AM button to turn on the System and start play-
ing the station you were last tuned to.
❏ You can switch from any other sound source to the radio by
pressing the FM/AM button.

Tuning In a Station

1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear on the
display.
Each time you press the button, the band alternates between
FM and AM.
2
Select a station using one of the following
methods.
9
FM/AM
FM/AM
FM MODE
Á
Band display, Frequency display, Preset channel
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
or
1
Á
FM mode indicators
• Manual Tuning
Briefly press the 22 or Á button to move from frequency
to frequency until you find the station you want.
• Auto Tuning
If you hold down the 22 or Á button for 1 second or
more and then release it, the frequency changes down, or up,
automatically until a station is found.
• Preset Tuning (Possible only after presetting sta-
tions)
Preset tuning using the Unit:
Select the preset number you want, using the 4 or ¢
button.
Example:
Press the ¢ button until the preset number "P-12" appears
on the display. Then, the display will show the preset
number's band and frequency.
Preset tuning using the Remote Control:
Enter the preset number you want to recall using the numer-
ic keys. See "Entering the Number with the Remote Con-
trol" on page 8.
SET
¢
4
OR
OR