Advertisement
Consult authorized service personnel for electrical work. Using power cords damaged during
installation (i.e., exposed or severed wiring) may result in fire or electric shock.
Conduct the work with adequate working space. Damage or bodily injury may result from
working under unsuitable conditions.
Avoid mounting this unit in areas where there is electrical wiring or water pipes, as fire or
electric shock may result.
Tools Required for Assembly:
1. Type 2 Philips Screwdriver (+)
2. Type 2 Philips Screwdriver (+) with 300mm (approx. 12-inch) or longer shaft
Frame Fastening Screws left/right
(Spacer Ring + Flat Washer + Spring Washer)
q
Plasma Display
<Components List>
q
Frame ................................................................... 1
w
Wall Mounting Unit ............................................... 1
4
Caution
<Names of Parts>
e
X 10
Frame
Rotation Jaw
Parts bag
contains:
w
Angle Adjustment Lever
r
Frame Rotation Shaft
Screws (left/right)
Spacer Rings (left/right)
Frame Attachment Lever Screws
e
Screw (M5 X 30) .......................... 10
r
Screw (M5 X 20) ............................ 1
Angle Adjustment
Lever Lock Screw
Advertisement
