Operation; Operating Principles - Miele KM 7200 FR Operating And Installation Instructions

Operating principles

This ceramic cooktop is equipped with
electronic sensor controls which react
to finger contact. For safety reasons,
when switching the appliance on, the
On/Off  sensor needs to be touched
for a little longer than the other sensors.
Each time you touch a sensor, an
acoustic signal sounds.
When the cooktop is switched off, only
the printed sensor control symbols and
numbers on the keybank for setting the
power levels are visible. More sensor
controls light up when the cooktop is
switched on.
In order to set or alter a power level, the
cooking zones must be "active". To
activate a cooking zone, touch the
indicator of the relevant cooking zone.
The relevant cooking zone indicator will
begin to flash when touched. While the
indicator is flashing, you can set or
adjust the power level or the duration.
Exception: If only one of the cooking
zones is in operation, you can alter the
power level without activating the
cooking zone.

Malfunction due to dirty and/or
covered sensors.
If the sensors are dirty or covered,
this could cause them to fail to react,
to activate a function inadvertently or
even to switch the appliance off
automatically (see "Safety features –
Safety switch-off"). Placing hot pans
on the sensor controls/indicators can
damage the electronic unit
underneath.
Keep the sensors and indicators
clean.
Do not place anything over the
sensors or indicators.
Do not place hot pans over the
sensors or indicators.
a Sensor controls and indicators

Operation

33