Playback Of Disc; Basic Play - Kenwood DV-502 Instruction Manual

Playback of disc

Basic play

Preparation
POWER
ON
÷ set the POWER ON/OFF switch to the ON (
position.
1
Load a disc
MAIN UNIT
2
Start playback
MAIN UNIT
6
To stop playback
MAIN UNIT
7
OFF
0
REMOTE
6
REMOTE
7
7 (Stop) key
)
1 Open the tray.
2 Place a disc.
3 Close the tray.
÷ When the key is pressed, the tray opens.
When the key is pressed again, the tray closes. When the
PLAY/PAUSE key is pressed while a tray is open, the tray
closes automatically, and then playback begins.
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
When a menu screen is recorded on the
disc, the menu screen will be displayed
when the TOP MENU key is pressed. At
the menu screen, the menu can be se-
lected by pressing the Cursor keys.
DVD VCD
C D MP3
TITLE No. (DVD)
÷ Each press pauses and plays the disc alternately.
RESUME playback
When the STOP key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the STOP key is pressed
again during stop, the RESUME function is can-
celled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
DV-502/DVF-3050 (EN/K,P,T,M,X)
6 (Play/Pause) key
TOP MENU
key
6 (PLAY/
POWER
PAUSE) key
0 (open/close) key
POWER ON/ OFF switch
Label side
TRACK No. (CD)
TITLE TRACKCHAP HOUR MIN
Time display
CHAPTER No. (DVD)
15
7 6
0
7 (Stop) key
TOP MENU
A B
SEC