Use Original Accessories; Prior To Initial Use; Initial Operation - Silvercrest KH 1560 Operating Instructions Manual

Safety / Prior to Initial Use / Initial Operation
J
Always fill the base of the appliance / water
tank with sufficient water for the period of
10
steaming. Do not cover the base of the appli-
ance / water tank
10
any other material. If not observed, this can
lead to an overheating of the appliance.
Damage of the appliance is the consequence.
J
Never immerse the appliance in water and
always pull the mains plug before cleaning or
transporting it.
J
FOOD-SaFE! The taste and smell
of your food are not detrimentally
affected by this product.
avoid the hazard of
life by electric shock:
J
Make sure that the details on the rating label
are in conformity with your mains voltage.
Only connect the unit to alternating current.
J
Do not at all operate this unit with an external
timer or a separate telecontrol system.
J
Check the power cord
for damage or deterioration.
J
Do not operate the appliance when the power
cord or the mains plug is damaged.
18
aTTEnTIOn! A damaged power cord
presents a hazard of life by electric shock.
Have appliances, which do not work faultlessly
or which are damaged, immediately and only
checked and repaired by the after-sales service.
J
Do not use the power cord
the appliance. Keep the power cord
from hot surfaces, sharp edges and mechanical
forces. Damaged or entangled cords
crease the risk of an electric shock.
J
Do not operate the appliance outside. Never
let the power cord
during operation.
J
Unplug the power cord
operating the appliance.
8 GB/IE/CY
with aluminium foil or
regularly
18
18
for unplugging
18
away
18
in-
18
become wet or damp
18
when you are not
18

Use Original accessories

Q
Only use accessories and additional equipment
stated in the instruction manual. The use of other
products or accessories than recommended in the
instruction manual may present a risk of injuries
for you.

Prior to Initial Use

Q
Clean all detachable parts prior to the initial use
with warm soapy water and dry them carefully.
Wipe the interior of the base of the appliance /
water tank with a damp cloth.
10

Initial Operation

Q
Observe the mains voltage. The mains voltage of
the power source must be in conformity with the
details on the rating label of the appliance. Appli-
ances declared with 230 V can also be operated
with 220 V.
j
Place the base of the appliance
ble, even surface.
j
Then place the black turbo ring
heating element
11
Make sure that the larger side faces down-
wards.
j
Now fill the base of the appliance / water tank
with cold water up to the MAX mark
10
note: Consider that the base of the appliance /
water tank has to be filled with water at
10
least up to the MIN mark
aTTEnTIOn! HaZarD OF BUrnS!
Make sure that the water does not exceed the
MAX mark . Otherwise, hot water may spurt
19
out of the appliance during operation.
aTTEnTIOn! Do not add anything like sea-
sonings etc. to the water. This may affect the
steam flow and / or damage the surface of the
base of the appliance / water tank
heating element
11
j
Now place the black condensate collection
basin onto the base of the appliance
7
Make sure that the semi-circular elevation
on a sta-
10
onto the
8
mounted in the centre.
19
.
9
and the
10
.
10
.
.