Page 3
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. The following icons / symbols are used in this instruction manual: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Dangerous electric current –...
Proper use The palm detail sander is intended for dry sand- ing and polishing of wood, plastic, metal, filler and painted surfaces. The product is intended exclusively for domestic use. Any other use or modification to the belt sander shall be considered as improper use and could give rise to considerable dangers.
Do not use the device if you cannot concentrate or you are feeling unwell. Operation Switching on and off Caution! Before connecting to the electricity supply, ensure that the palm detail sander is switched off. Safety / Operation UK / IE...
Operation Switching on Push the On / Off switch upwards into position “1”. Switching off Push the On / Off switch downwards into position “0”. Vacuum dust extraction Warning! Danger of fire! There is the danger of fire when working with electrical devices that have a dustbox or can be connected to a vacuum cleaner.
Sand difficult to reach places with the front or side corners of the backing plate Maintenance and cleaning Attention: before starting any work on your sander, always pull the plug out of the mains socket. Remove any dirt from the tool, surfaces and other items in the working area immediately after you finish work.