RESETTING THE TV TO FACTORY CONDITION
USING SERVICE MODE
1. TV must be in standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel 5
3. If necessary, press
mode.
4. Press
.
8
"SERVICE" changes to green RST.
5. Press
MUTING
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
TIMER
7. Cycle AC Power (Unplug and Plug AC Cord from the
AC Outlet).
The set restarts and displays the Initial Setup screen.
This may take several minutes.
KDL-22EX425/32EX425/32EX525/40EX525/46EX525
SECTION 7 - SERVICE ADJUSTMENTS
Volume +
JUMP
or
OPTIONS
to go to DIGITAL
.
Standby
Standby
POWER
POWER
POWER .
71