Page 1
KZ-V10J/MV Remote controller Used Not used This service manual is composed only of the different points. Please refer to the issued service manual (Issue No.49466 KZ-V10J) for other items. Contents Safety precaution Difference table Section 5 Parts list 5.1 Cabinet and chassis assembly <M2>...
Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. The following table indicate main different points between models KZ-V10J and KZ-V10J/MV. MODEL...
Page 3
Mechanism assembly <M4> REF. MODEL KZ-V10J KZ-V10J/MV ITEM TENSION ARM ASSEMBLY PQ46303A-8 *PQ46303B-8 SPACER PQM30018-79 *PQM30018-76 REEL ASSEMBLY(TAKE UP)/REEL DISK ASSEMBLY(TAKE UP) PQ46562B *PQ46551B CLUTCH UNIT(SUPPLY) PQ46316C-6 *PQ46316F GUIDE ARM ASSEMBLY PQ46325C-9 *PQ46325D POLE BASE ASSEMBLY(SUPPLY) PQ46595B-5 *PQ46595C POLE BASE ASSEMBLY(TAKE UP)
5.1 Cabinet and chassis assembly <M2> BEWARE OF BOGUS PARTS Parts that do not meet specifications may LABEL cause trouble in regard to safety and per- (CAUTION) formance. We recommend that genuine JVC parts be used. 159J 159H 159F 159F...
5.2 Mechanism assembly <M4> A/C HEAD BOARD ASSY <12> Classifi- Symbol in Part No. cation drawing Grease KYODO-SH-P NOTE:The section marked in AA and BB indicate lubrication and greasing areas. COSMO-HV56...
Page 8
KZ-V10J/MV VICTOR COMPANY OF JAPAN, LIMITED PERSONAL & MOBILE NETWORK BUSINESS UNIT. 10-1,1Chome,Ohwatari-machi,Maebashi-city,Japan (No.49651) 200107(S)