Honeywell CT40 User Manual page 20

Remove the battery:
1. Depending on the model type either power Off the computer or place it in
2. Release the hand strap.
3. Unlock the battery.
10
battery swap mode. See
• For the model CT40-xxx-xxxxx0x, press and hold down the small button on
the battery latch, and then slide the latch toward the right side of the
computer to unlock the battery.
• For all CT40 XP models and CT40-LON-xxxxxAx, CT40-xxx-xxxxxBx, and
CT40-xxx-xxxxxHx models, press and hold down the small button on the
battery latch, and then slide the latch toward the right side of the computer.
The battery will pop-up slightly on the edge when latch is released.
Before Attempting to Remove the Battery
CT40/CT40 XP Mobile Computer Series User Guide
on page 9.