Advertisement
5
Installing the AC Output Power Cable
Use a socket wrench and extension
rod to connect the AC power cable.
The extension rod must be longer
than 150 mm.
Do not install third-party devices in
the AC connection box.
There are two rows of AC terminals in the
AC adapter box. The lower row is used to
connect the AC transfer cable between the
AC adapter box and the SUN2000, and the
upper row is used to connect the AC output
power cable on the user side.
2. Remove the AC terminal box and install
partition boards.
1. Connect the AC transfer cable to the AC
terminals in the lower row of the AC
adapter box.
3. Route the AC transfer cable through the
AC wiring terminal.
41
Advertisement
