Table of Contents
Advertisement
2. The slide that touches the main roller is passed between the two rollers and separation pad by rotation
(in the clockwise direction) of the main roller and sub-roller and carried to the carrier assembly. The
cam returns to the first position when the slide is passed through the cam plate. At that time, the sub-
roller moves as the slide is carried. This enables the slide to be carried smoothly. It also prevents the
optical axis of a sensor from carrying the slide in overlap.
The slide carried to the carrier assembly is pre-scanned once.
3. The pre-scanned slide is carried between the two rollers and separation plate on the opposite side of
the router through which it was passed first. The cam also rotates counterclockwise by 90 degrees.
3-2 (E)
UYA-S90SF
Advertisement
Table of Contents
