Advertisement
1
Handle
Battery
Latch
English
CORDLESS LANTERN UB18DDL HANDLING INSTRUCTIONS
Please read the following instructions throughly before using this lantern and use it correctly.
WARNING:
● Be careful of electrical shock.
● When not in use or during inspection and maintenance, be sure
to turn the switch OFF on the unit, and remove the battery from it.
CAUTION:
● Do not open the lamp cover immediately after using the
lantern because the LED lamp very hot.
● Do not touch the LED lamp while lit or right after using.
Touching it might cause burns.
NOTE: Do not leave the switch in the ON position while not in use. This will shorten the life (charge/discharge times) of the battery.
SPECIFICATIONS
LED lamp
Dimensions (without battery)
Weight (without battery)
Operating time (Approx.): Using full charged Battery
Battery
18 V
LED lamp
12 hours
LED small lamp
HOW TO USE
Inserting or removing the battery (See Fig. 2)
To install, make it face the same as battery and insert
inwards in the direction
To remove, extract it towards the direction
down the latch of battery.
AUTOMATIC SWITCHING FUNCTION
The lamp automatically switches to the LED to prevent total
loss of light when the battery wears down.
服务中心
日立工机商业 （中国） 有限公司
上海市长宁区遵义南路88号协泰中心19B－C
Lamp cover
1
323-340
LED holder
LED lamp
LED small lamp
Knob
14.4 V
18 V
4.0 Ah
9 hours
9 hours
200 hours
in the fi gure.
while holding
2
Battery
● When hung from a high position always secure it with string
or similar item so it won't fall. If it falls, injuries might result.
● Always turn the switch off (OFF) when not using.
● Do not use in the rain.
● Do not disassemble, strike or otherwise apply impacts to
the lantern body.
● Do not let gasoline or thinner get on the lantern body.
● Do not leave the lantern in places that reach high temperatures
(60°C or higher) such as in vehicles under a blazing hot sun.
Doing so might cause the lantern to break down.
● Do not use any other than the specifi ed storage batteries.
LED 3.6 W (0.3 W × 12 pcs.)
height 305 mm × width 95 mm × depth 96 mm
14.4 V
18 V
3.0 Ah
7 hours
6 hours
150 hours
NOTE: Only parts 1 will need replacement.
Important notice on the batteries for the Hitachi cordless
power tools
Please always use one of our designated genuine batteries.
We cannot guarantee the safety and performance of
our cordless power tool when used with batteries other
than these designated by us, or when the battery is
disassembled and modifi ed (such as disassembly and
replacement of cells or other internal parts).
香港新界荃湾青山道388号
0.5 kg
14.4 V
18 V
2.0 Ah
4.5 hours
4.5 hours
100 hours
制造商
日立工机亚洲有限公司
中国染厂大厦11楼A-D室
Code No. C99206021 A
Printed in China
Latch
14.4 V
1.5 Ah
3.5 hours
75 hours
212
Advertisement
