Front Usb(Usb-008) And Harness(Sim-001) - Sony BDP-BX37 Service Manual

1-5-3. Front USB(USB-008) and Harness(SIM-001) dressing for BDP-BX37/S370:US,CND,PX,TW,E,BR,AR/
S470:US,CND,TW,E,BR,AR)
1
2
6
5
1- Slot in the USB harness (USB-008) to the cable holder
2- Place the cable holder and align with chasis hole
3- Insert USB harness (USB-008) to CN602
3
4
4- Place the Nylon Rivet on the hole chasis together with cable holder
5- Insert connector - CN301 to Power block (CN2)
6- Pull harness (SIM-001) through the board to board between P/S and MB;
and insert the harness to CN1509
8
7
7- Insert FFC cable (FIM-026) to CN702 and fold the first end of the
FFC.
8- Push in the FFC through the chasis hole and insert the second end
of it into CN1504.
BDP-BX37/S270/S370/S373/S470
Caution Point:
Make sure harness (SIM-001) is
under the cable holder
1-25