Canon LX-D5500 User Manual page 110

Chapter 3 How to Use the Printer Driver
[ Low Temperature Print Mode]
Set the printer to [Low Temperature Print Mode].
When the printer is used at a temperature of less than 13 degrees Celsius (55 degrees Fahrenheit),
the amount of ink pre-fire on the paper is increased for printing. Therefore, when used in a location
where the room temperature easily fluctuates, the mode automatically switches according to room
temperature when printing, resulting in uneven print quality. Use this mode when you want to keep
printing quality consistent.
The default setting is "OFF".
Use this function only when necessary, as it consumes more ink than other modes.
Prevent Unevenness
［
This prevents uneven printing.
The default setting is "OFF".
When activated, it takes longer than usual for printing to begin and printing speed is slower than
usual.
Prevent Paper Rubbing Mode
［
When printing a high-density image, you can increase the gap between the print head and paper to
prevent paper rubbing.
The default setting is "OFF".
Level 1: Raises the Print heads from the paper to reduce their contact with the paper.
Level 2: Maximizes paper suction to reduces contact with the paper.
Level 3: Executes Levels 1 and 2 simultaneously.
Important
• When printing is in progress or an error has occurred, you cannot change any special setting.
• When loading roll paper, uncheck the [Fanfold Paper Mode] check box.
• Administrative privileges over this printer are required to configure settings of this printer.
If a user without administrative privileges proceeds with configuration of settings, a message "You
do not have rights to printer management. Please contact your system administrator." appears.
For more details, see
106
］
］
Administrative privileges required for certain features
「
P.96
（ ） 」 .