Activate A Motion Detection Grid - GE Digia II User Manual

22 Digia II
User Manual

Activate a motion detection grid

To define what areas of the camera image set off a motion event, do the following:
1. Set the motion detection to Partial.
Note: Enabled cells are shaded green and disabled cells are blank.
2. Use the directional buttons to navigate through the grid.
3. Press Enter to begin the cell selection.
4. Use the directional buttons to select the cells you require.
5. Press Enter again to toggle all the selected cells. The cells become enabled if they were disabled, and
disabled if they were enabled.
6. Press Menu to save your changes and exit back to the Alarms menu.