Removing Procedure - Mitsubishi Electric QA1S6ADP-S1-U-E User Manual

7.
Connect the ground cable to the FG terminal of the A1S5B (when the A1S5B is used).
8.
Mount the QA1S6ADP-S1.
QA1S6ADP-S1
Extension
cable
connector (IN)
9.
Use the Q series extension cable and connect the QA1S6ADP-S1 to the upper or lower
level extension base unit.
10.
Mount the provided fixing screw covers to the fixing screws of the extension cable
connector.
Connector fixing screw
for an extension cable

Removing procedure

Reverse the mounting procedure to remove the QA1S6ADP-S1 from the extension base unit.
18
• Insert the connector of the QA1S6ADP-S1
Adapter mounting
screw (M3×6)
• Pull out the ground cable connected to the
Ground
cable
guide hole
Special
metal
fixture A
Extension base unit
Mount the covers marked "1" to the upper
Fixing screw
screws, and those marked "2" to the lower
cover
screws as shown on the left.
Extension
cable
to the extension cable connector (IN side)
of the extension base unit, and fix the
adapter with the adapter mounting screws
(three locations).
FG terminal of the A1S5B through the
guide hole (when the A1S5B is used).