Parts Identification; Filling The Water Tank - Panasonic NI -FS770 Operating Instructions Manual

Deodorizing by steam
*1
Powerful steam removes the following odors effectively
4x powerful steam removes the following odors effectively*2
Body Smoke Sweat Food Pesticide Damp
odor smell smell smell smell odor
Perception of odor removal effect varies from person to person.
Other effects
1. Sterilization for important garments*3
2. Inhibit related allergic substances caused by mites*4
3. Inhibit related allergic substances caused by pollens*5
The results of above situations may vary depending on the
surrounding environment (temperature, humidity), the time of
exposure to the steam, the types of fabric.
*
1.Deodorization effects (according to our own research.)
Tested subject: damp odor, pet odor, body odor, sweat smell,
smoke smell, food smell (roasted meat and fish) and pesticide
smell.
Test method: Press the iron on the wool fabric with odors for
10 seconds and spray steam.
Use the Six-grade Odor Intensity Evaluation
Test result: Confirmed the effects of inhibiting for each odors.
2.According to the comparison of deodorization effects in the
*
following two conditions.
Use powerful steam for 10 seconds.
Use 4x powerful steam for one time and powerful steam for
10 seconds in a total of both modes.
08
* 3. Content of the degerming test
Test organization: Japan Food Research Laboratories
Test certificate issue number:
16107291001-0101 and 16107291001-0201
Test certificate issue date: October 17th, 2016
Test method: Confirm the degerming results by pressing
the high temperature soleplate against the cloth with
germs.
Test result: 99 % of the germs are removed. Two types of
Pet germs are subject to the test.
odor * 4. Contents of test on the inhibition of related allergic
substances caused by mites.
Test organization: Panasonic (Ltd.) Analytic Center
Test report No.: 4AA33-161001-F01
Test report issue date: October 14th, 2016
Test method: The inactivation test by pressing the high
temperature soleplate against the cloth stained with
mites (Derf1).
Test result: The inactivation rate is over 90 % in 1 second
pressing, and over 97 % in 3 seconds pressing.
* 5. Contents of test on the inhibition of related allergic
substances caused by pollen.
Test organization: Panasonic (Ltd.) Analytic Center
Test report No.: 4AA33-161003-F01
Test report issue date: October 14th, 2016
Test method: The inactivation test by pressing the high
temperature soleplate against the cloth stained with
pollens (Cryj1).
Test result: The inactivation rate is over 96 % in 1 second
pressing, and over 98 % in 3 seconds pressing.

Parts identification

4x powerful
steam indicator
(Refer to <4x powerful
steam> on P12)
Indicator
(HongKong) (Taiwan)
Ventage
Water fill
cover
Handle
Water
Set button
inlet
Power plug
※
Steam
button
MAX mark
(台灣：滿水)
Power
switch
Soleplate
Soleplate
vents
Base
Half line
(Approx. 58 mL)
※ Power plug type may vary in compliance with respective
country or region requirements.

Filling the water tank

Notes: a. Do not use tap water or high mineral
content of "mineral water". Otherwise, it
will impact the service life of product.
b. Please fill the water tank with distilled
water or pure water.
1. Fill the cup with distilled water
or pure water to the " MAX "
mark (about 115 mL).
Power
cord
2. Remove the water fill cover, and add water from the
water inlet to the tank "MAX(台灣：滿水)" mark.
Close the water fill cover, and keep the ventage upward.
• When used as a dry iron, it can be used without
adding water.
Notes： a.Do not fill over the "MAX（台灣:滿水)" mark.
b.Do not slosh water over the main body when
adding water into the water tank. Wipe the main
body if there is any water drop on it.
c.Check whether the water reaches the " MAX
Cup （台灣:滿水) " mark.
When setting the main body
upright, check the water level
with the upper edge line of
tank window.
Ventage
Upper edge line
of tank window
09