7 Product Specifications; Wall Mount - Philips 5000 Series User Manual

6 Wall mount

Before you mount this product on the
wall, read all safety precautions.
Note
•
Improper wall mounting may result in
accident, injury or damage. If you have
any query, contact Consumer Care in your
country.
•
Secure the wall mount to a wall that can
support the combined weight of the
product and the wall mount.
Screw length/diameter
Depending on the type of wall
supporting this product, make sure that
you use screws of a suitable length and
diameter.
≤ 9 mm/
0.35"
>25 mm/0.98"
See the illustration in the quick start
guide on how to wall mount this
product.
Mount front and rear speakers
1) Mark two holes on the wall using a
supplied wall bracket, then secure
two suitable screws on the wall as
indicated by two holes.
2) Fix a supplied wall bracket onto a
speaker.
3) Hang the speaker on the screws
which are secured on the wall.
EN
16
7 Product
•
Specifications and design are subject to
change without notice.
Amplifier
•
•
•
•
Audio
3.5 mm/
•
0.14"
USB
•
•
•
•
•
•
Bluetooth
•
•
specifications
Note
Total output power:
420W RMS (+/- 0.5 dB, 10% THD)
Frequency response:
20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
Input sensitivity:
•
AUX: 500 mV
•
AUDIO IN: 200 mV
S/PDIF Digital audio input:
•
Optical: TOSLINK
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage
Class (MSC)
File system: FAT16, FAT32, NTFS
Supports MP3 file format
Sampling frequency:
•
MP3: 8 kHz, 11 kHz, 12 kHz,
16 kHz, 22 kHz, 24 kHz, 32 kHz,
44.1 kHz, 48 kHz
Constant bit rate:
•
MP3: 8 kbps-320 kbps
Bluetooth profiles: A2DP
Bluetooth version: 4.1