Program Tracks - Philips AZ1852 User Manual

Tip
•
Only and
tracks.
•
When play CD , Mode should be Repeat/Repeat All/Shuffle.
•
When Mp3, Mode should be Repeat/Repeat Album/Repeat All/
Shuffle.

Program tracks

You can program a maximum of 20 tracks.
1
In CD/USB mode, at the stop position, press PROG to activate
the program mode.
[PROG] (program) starts to blinks.
»
2
For MP3/WMA tracks, press AL-/AL+ to select an album.
3
Press
confirm.
4
Repeat steps 2 to 3 to program more tracks.
5
Press
During play, [PROG] is displayed.
»
• To erase the program, in the stop position, press
• To review the program, in the stop position, press and hold
PROG for more than 2 seconds.
General information on cassette recording
• Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.
AL can be selected when you play programmed
to select a track number, then press PROG to
/
on the main unit to play the programmed tracks.
.