Related Manuals for Philips 22PDL49X6H
Summary of Contents for Philips 22PDL49X6H
- Page 1 Register your product and get support at www.philips.com/welcome EN User manual 47PFL4606H 46PFL5606H 42PFL4x06H 42PFL3x06H 40PFL5xx6H 37PFL4606H 32PFL5x06H 32PFL4606H 32PFL3x06H 26PDL49x6H 22PDL49x6H DesignLine Tilt...
- Page 2 When you select a channel from the channel grid, a preview is not displayed. BG Допълнение Когато изберете канал от мрежата с канали, на дисплея не се показва преглед. Dodatek Při výběru kanálu z mřížky není náhled zobrazen. Tillæg Når du vælger en kanal fra kanaloversigten, er der ikke nogen eksempelvisning.
- Page 3 При выборе канала из таблицы каналов предварительный просмотр не отображается. Príloha Keď vyberiete kanál z mriežky kanálov, ukážka sa nezobrazí. Dodatek Ko na seznamu kanalov izberete kanal, ni prikazan predogled. Dodatak Kada izaberete kanal iz mreže kanala, pregled se ne prikazuje. När du markerar en kanal i kanalöversikten visas ingen förhandsgranskning.
-
Page 5: Table Of Contents
Rename channels Rearrange channels Access CAM services Connect devices Back connections Side connections Connect a computer Use a Conditional Access Module Use Philips EasyLink Use a Kensington lock Product information Supported display resolutions Multimedia Tuner/Reception/Transmission Remote control Power Supported TV mounts... -
Page 6: Notice
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within... - Page 7 Copyright Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in...
-
Page 8: Important
Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. •... -
Page 9: Screen Care
Risk of damage to the TV! • Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. •... -
Page 10: Environmental Efforts
Environmental efforts Philips continuously focuses on lowering the environmental impact of its innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-efficient use, end-of-life instructions and product recycling. -
Page 11: Your Tv
3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. TV controls +/-: Adjust volume. (Home): Access the home menu. c CH +/-: Switch channels. -
Page 12: Remote Control
Remote control (Standby-On) • Switch the TV on or to standby. b Play buttons • Control video or music. FIND • Access the menu to select a TV channel list. (Home) • Access the home menu. CH - / CH + (Previous/Next) •... -
Page 13: Remote Control Usage
Remote control usage When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. xxPFL5xx6/xxPFL4xx6 ~30˚... -
Page 14: Use Your Tv
4 Use your TV This section helps you perform basic TV operations. Switch your TV on • Press the power switch on the TV. » There is a short delay before the TV responds. xxPFL5xx6 xxPFL5xx6/xxPFL4xx6 xxPFL3xx6 DesignLine Tilt If the TV is in standby •... -
Page 15: Switch Your Tv Off
Switch your TV off • Press the power switch on the TV again. » The remote control sensor on the TV switches off. » For xxPFL5xx6, the TV no longer consumes energy. » For xxPFL4xx6, xxPFL3xx6, and DesignLine Tilt, though the TV consumes very little power when in standby, energy continues to be consumed. -
Page 16: Watch Connected Devices
Watch connected devices Note • Before you select a device as a source, switch the device on. Select a device from the source list SOURCE. Press » The source list appears. Press to select a device. Press OK to confirm your choice. »... -
Page 17: Use Teletext
Use teletext Press TEXT. » The main index page appears. Select a page with one of the following: Press the Numeric buttons to enter a • page number. • Press to view the next or previous page. • Press the Colour buttons to select a colour coded item. -
Page 18: Use More Of Your Tv
5 Use more of your TV Access TV menus Menus help you to install channels, change picture and sound settings and access other features. Press . The menu screen appears. Select one of the following, then press OK. [Watch TV]: If a source other than •... -
Page 19: Remove Devices From The Home Menu
Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. Press . Select a device to remove. Press OPTIONS. Select [Remove device], then press OK. Select [Remove], then press OK. »... - Page 20 Manually adjust picture settings Press . Select [Setup] > [TV settings] > [Picture], then press OK. Select one of the following settings, then press OK. [Smart picture]: Access predefined smart • picture settings. • [Reset]: Reset to factory default settings. [Contrast]: Adjust the intensity of backlight •...
-
Page 21: Change Picture Format
Change picture format Press ADJUST. Select [Picture format], then press OK. Select a picture format, then press OK. Summary of picture formats The following picture settings can be configured. Note • Depending on the format of the picture source, some picture settings are not available. -
Page 22: Use The Universal Access Menu
Manually adjust sound settings Press . Select [Setup] > [TV settings] > [Sound], then press OK. » The [Sound] menu appears. Select one of the following settings, then press OK. • [Smart sound]: Access predefined smart sound settings. • [Reset]: Reset to factory default settings. [Clear sound]: Enhance the sound clarity. -
Page 23: Use Advanced Teletext Features
Use advanced teletext features Access the teletext options menu Access the teletext features through the teletext options menu. Press TEXT. » The teletext screen appears. Press OPTIONS. » The teletext options menu appears. Select one of the following options, then press OK. -
Page 24: Create And Use Lists Of Favourite Channels
Create and use lists of favourite channels You can create a list of your preferred TV channels so that you can find those channels easily. View only the list of favourite channels While you watch TV, press » The channel matrix menu is displayed. OPTIONS. -
Page 25: Display The Tv Clock
Change programme guide options You can set or clear reminders, change the day, and access other useful options in the programme guide options menu. Press . Select [Programme guide], then press OK. OPTIONS. Press » The programme guide menu appears. Select one of the following options, then press OK. -
Page 26: Use Timers
Change the clock mode Press . Select [Setup] > [TV settings] > [Preferences] > [Clock] > [Auto clock]. Select [Automatic] or [Manual], then press Change the time zone Note • This option is only available if you select [Auto clock] > [Automatic] (in countries with clock transmission data). -
Page 27: Lock Unsuitable Content
Lock unsuitable content You can prevent your children from watching certain programmes or channels by locking the TV controls. Set or change code Press . Select [Setup] > [Channel settings] > [Child lock]. Select [Set code] or [Change code]. » The [Set code] / [Change code] menu appears. -
Page 28: View Scenea
View Scenea You can display a default picture as the wallpaper on your TV. You can also load another picture as the wallpaper. If the sleeptimer is off, the wallpaper is displayed for 240 minutes. Otherwise, it is displayed for the duration of the sleeptimer. -
Page 29: Play Photos, Music And Videos On Usb Storage Devices
Select a subtitle language in digital channels Note • When you select a subtitle language in a digital TV channel as described below, the preferred subtitle language set in the installation menu is temporarily overruled. While you watch TV, press Select [Subtitle language], then press OK. -
Page 30: Listen To Music
Listen to music In the USB browser, select [Music], then press OK. Select a music track or album, then press OK to play. To control play, press the play buttons: • to play. • to pause. • to play the previous or next track. -
Page 31: Listen To Digital Radio Channels
» The radio channel grid appears. Select a radio channel and press OK to listen. Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Ways to update the TV software... - Page 32 Step 3: Update the TV software Connect your USB storage device to the » The TV detects the USB flash drive and starts to scan for software version. If a message prompts you to update the software, follow the on-screen instructions to update the TV software.
-
Page 33: Change Tv Preferences
Change TV preferences Use the preferences menu to customise your TV settings. Press . Select [Setup] > [TV settings] > [Preferences]. Select one of the following, then press OK. [Menu language]: Select a menu • language. [Sleep timer]: Switch the TV to •... -
Page 34: Install Channels
6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). Afterwards, you can re-install and fine tune channels. Automatically install channels You can search and store channels automatically. -
Page 35: Manually Install Analogue Channels
Manually install analogue channels You can search and store analogue TV channels one at a time. Step 1: Select your system Note • If your system settings are correct, skip this step. Press . Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual antenna installation] >... -
Page 36: Rearrange Channels
Rearrange channels After you install channels, you can rearrange the order in which they appear. While you watch TV, press » The channel matrix menu is displayed. OPTIONS. Press » The channel options menu appears. Select [Reorder], then press OK. Select the channel to rearrange, then press »... -
Page 37: Connect Devices
7 Connect devices This section describes how to connect devices with different connectors. For the location of these connectors on your TV, see the quick start guide. More examples of connections with other devices are provided in the Quick Start Guide. - Page 38 e PC IN (VGA and AUDIO IN) Audio and video input from a computer. AUDIO IN LEFT/RIGHT VGA/DVI f HDMI 1 ARC Digital audio and video input from high- definition digital devices such as Blu-ray players. Also outputs TV audio to other EasyLink-compliant devices, such as home theatre systems.
-
Page 39: Side Connections
Side connections a AUDIO L/R Audio input from analogue devices connected to VIDEO. b VIDEO Composite video input from analogue devices such as VCRs. c USB Data input from USB storage devices. d HDMI Digital audio and video input from high- definition digital devices such as Blu-ray players. -
Page 40: Connect A Computer
Connect a computer Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: Note •... -
Page 41: Use A Conditional Access Module
Use a Conditional Access Module A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels. Note • Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module. -
Page 42: Use Philips Easylink
TV switches on from standby, and switches to the correct source. Note • If you do not intend to use Philips EasyLink, switch it off. Press . Select [Setup] > [TV settings] > [EasyLink] > [EasyLink]. Select [On] or [Off], then press OK. - Page 43 Set TV speakers to EasyLink mode If you connect an HDMI-CEC compliant device that includes speakers, you can choose to hear the TV from those speakers instead of the TV speakers. When you play content from an EasyLink compliant home theatre, if you want to mute the TV speakers automatically, turn on EasyLink mode.
-
Page 44: Use A Kensington Lock
Hear TV audio through another device If you connect an EasyLink- compliant device that has speakers, you can get the most out of those speakers if you listen to TV audio through them. If the connected device is HDMI-ARC compliant, and you connect the device through an HDMI ARC connector, you can output TV audio through the HDMI cable. -
Page 45: Product Information
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Supported display resolutions Computer formats • Resolution - refresh rate: • 640 x 480 - 60 Hz • 800 x 600 - 60 Hz •... -
Page 46: Supported Tv Mounts
Supported TV mounts To mount the TV, purchase a Philips TV mount or a compatible TV mount. Warning • Follow all instructions provided with the TV mount. TP Vision Netherlands B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. - Page 47 • Weight: 8.30 kg • With TV stand • Dimension (WxHxD): 641.5 x 428.3 x 166.4 (mm) • Weight: 8.98 kg 22PDL49x6H • Without TV stand • Dimension (WxHxD): 532.5 x 357 x 36.6 (mm) • Weight: 5.6 kg •...
-
Page 48: Troubleshooting
The standby light on the TV blinks red: • Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact Philips Consumer Care. You forgot the code to unlock the TV lock feature •... -
Page 49: Sound Issues
If you cannot resolve your problem, refer to the FAQs for this product at www.philips.com/support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum. Warning • Do not attempt to repair the product yourself. This may cause severe injury, irreparable damage to your product or void your warranty. -
Page 50: Index
10 Index age rating analogue channels language, change audio language enable Insert care channels channel list favourites install (automatic) rearrange rename reorder switch update child lock clock common interface computer, see PC Conditional Access Module connect connect device connect, PC connect, USB connectors controls... - Page 51 subtitles location, home or shop multimedia multimedia, play files mute TV speakers PC, display resolutions picture format picture settings Pixel Plus link position the TV power recycle reinstall TV remote control onscreen overview rename channels reorder channels Scenea, see screen saver Scenea, switch on screen care screen saver...
- Page 52 Information about how to re-tune your TV during the digital Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.
- Page 53 Digital UK, the body leading the digital TV switchover, will advise you when you need to re-tune during the switchover. If you do not re-tune your channels when advised to do so by Digital UK, you may lose some or all of your channels until you do re-tune.
-
Page 54: Contact Information
2111983028 (national*) zgodnie z taryfą operatora *Μπορεί να έχετε μεγαλύτερο κόστος αν καλείτε από κινητό This information is correct at the time of print. For updated information, see www.philips.com/support. Portugal United Kingdom 707 78 02 25 0844 338 04 88 (0,12€... - Page 55 © 2012 TP Vision Netherlands B.V. All rights reserved. Document order number:...