Table of Contents
Advertisement
12V CORDLESS IR THERMOMETER
DCT414-XE
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Peak
Rated
Type
Battery type
Power output
Distance to spot
Temperature range
Emissivity
Emissivity adjustability
Accuracy
Laser power
Laser wavelength
Weight (without battery pack)
Laser Information
The Infrared Thermometer (IR thermometer) is a Class 2 laser
product and complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to laser notice No. 50, dated
June 24, 2007.
EC-Declaration of Conformity
D
WALT hereby declares that this D
e
is in compliance with the Directive 2014/53/EU and to all
applicable EU directive requirements.
The full text of the EU declaration of conformity can be
requested at D
WALT, Richard- Klinger-Straße 11, D-65510,
e
Idstein, Germany or is available at the following internet address:
www.2helpu.com
Search by the Product and Type Number indicated on the
nameplate.
For more information, please contact D
the back of the manual.
WALT one of the
e
DCT414-XE
V
12
DC
V
10.8
DC
1
Li-Ion
W
0.5
D:S
Approximately 12:1
-30 ˚C – 550 ˚C
(-22 ˚F – 1022 ˚F)
0.1 to 1
in 0.01 increments
+/-1.5% or +/-1.5 ˚C
(+/-1.5% or +/- 35 ˚F),
whichever is greater
on a black body source
(EMS 0.95)
mW
< 1, CLASS 2
LASER PRODUCT
nm
620–690
kg
0.3
WALT Bluetooth® product
e
WALT at the address in
e
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
General Tool Safety Warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust.
c ) Keep children and bystanders away while operating
a tool.
2) Personal safety
a ) Stay alert, watch what you are doing and use
common sense when operating a tool. Do not use
a tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating tools may result in serious personal injury.
b ) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the tool in
unexpected situations.
English
3
Advertisement
Table of Contents
