Sony DAT DTC-690 Operating Instructions Manual page 13

D
e
REC LONG ABS TIME REMAINING DISPLAY CAUTION
OFF AUTO DIGITAL IN
32 KHZ OPTICAL
44.1 KHZ
COAXIAL
M S
48 KHZ
– dB 60 40 30 20 12 8 6 4
L
R
o
r
STEP MUSIC SCAN REPEAT 1 START ID
PGM NO. RMS AMS ALL SKIP
SHIFT AUTO
START ID
RENUMBER
WRITE ERASE
SKIP ID
SKIP ID
REHEARSAL MARGIN WRITE ERASE
2 0 OVER
S
END ID
dB
WRITE ERASE
y t
i u
Location and
Function of Controls
e
Sampling frequency indicator
48 kHz: Lights when recording or
playing back analog input signals
(standard mode).
44.1 kHz: Lights when recording or
playing back a CD or a pre-recorded
DAT cassette tape.
32 kHz: Lights when recording or
playing back analog input signals
(long-play mode).
r
START ID indicator
Flashes when writing (for 9 or 18
seconds) or erasing a start ID code,
and lights when the start ID is detected
during playback.
SKIP ID indicator
Lights when writing (for 1 or 2 seconds)
or erasing a skip ID code or when the
skip ID is detected during playback.
t
SKIP ID mode indicator
WRITE: Lights when writing the skip ID.
ERASE: Lights when erasing the skip ID.
y
END ID mode indicator
WRITE: Lights when writing the end ID.
ERASE: Lights when erasing the end ID.
u
MARGIN indicator
Shows how much margin there is
between the peak level of input audio
signal and 0 dB.
i
REHEARSAL indicator
Lights while the rehearsal function is
activated (32).
o
Peak level meters
Indicate the signal levels during
playback and recording. There are
separate meters for each left and right
channel. These meters have a peak
hold function which indicates the peak
level momentarily.
13