Print Server Functions - Fujitsu PR-LN4 Software Manual

5.4 PRINT SERVER FUNCTIONS

[General]
Configures general network settings.
Item
General Change root
Password
Printer Name
[TCP IP]
Configures settings such as the IP address for using the TCP/IP protocol.
Item
TCP IP DHCP
IP Address
Subnet Mask
Default Gateway
*1) When DHCP disabled, IP Address is 192.168.192.168.
PR-LN4 Software Guide
Settings details
Sets the password for managing the PR-LN4
using an ASCII string (7 characters or less).
This password is used as the authentication
password when configuring settings on the web.
Sets the printer name.
(Maximum 31 single-byte characters)
Settings details
Sets the DHCP protocol to enabled (ENABLE) or
(*1)
disabled (DISABLE).
Sets the IP address of the PR-LN4 using the
decimal format "xxx.xxx.xxx.xxx".
Sets the subnet mask of the PR-LN4 using the
decimal format "xxx.xxx.xxx.xxx". "0.0.0.0" is
invalid, and automatically uses the subnet mask
corresponding to the IP address.
Sets the default gateway of the PR-LN4 using
the decimal format "xxx.xxx.xxx.xxx". "0.0.0.0"
is invalid.
26 / 34
Factory default Setting
None
None
Factory default Setting
ENABLE
192.168.1.1
255.255.255.0
0.0.0.0